Jump to content
Nytro

Lepus is a tool for enumerating subdomains

Recommended Posts

Lepus

Lepus is a tool for enumerating subdomains, checking for subdomain takeovers and perform port scans - and boy, is it fast!

Basic Usage

lepus.py yahoo.com

Summary

Enumeration modes

The enumeration modes are different ways lepus uses to identify sudomains for a given domain. These modes are:

Moreover:

  • For all methods, lepus checks if the given domain or any generated potential subdomain is a wildcard domain or not.
  • After identification, lepus collects ASN and network information for the identified domains that resolve to public IP Addresses.

Collectors

The Collectors mode collects subdomains from the following services:

Service API Required
AlienVault OTX No
Anubis-DB No
Bevigil Yes
BinaryEdge Yes
BufferOver Yes
C99 Yes
Censys Yes
CertSpotter No
CommonCrawl No
CRT No
DNSDumpster No
DNSRepo Yes
DNSTrails Yes
Farsight DNSDB Yes
FOFA Yes
Fullhunt Yes
HackerTarget No
HunterIO Yes
IntelX Yes
LeakIX Yes
Maltiverse No
Netlas Yes
PassiveTotal Yes
Project Discovery Chaos Yes
RapidDNS No
ReconCloud No
Riddler Yes
Robtex Yes
SecurityTrails Yes
Shodan Yes
SiteDossier No
ThreatBook Yes
ThreatCrowd No
ThreatMiner No
URLScan Yes
VirusTotal Yes
Wayback Machine No
Webscout No
WhoisXMLAPI Yes
ZoomEye Yes

You can add your API keys in the config.ini file.

The Collectors module will run by default on lepus. If you do not want to use the collectors during a lepus run (so that you don't exhaust your API key limits), you can use the -nc or --no-collectors argument.

Dictionary

The dictionary mode can be used when you want to provide lepus a list of subdomains. You can use the -w or --wordlist argument followed by the file. A custom list comes with lepus located at lists/subdomains.txt. An example run would be:

lepus.py -w lists/subdomains.txt yahoo.com

Permutations

The Permutations mode performs changes on the list of subdomains that have been identified. For each subdomain, a number of permutations will take place based on the lists/words.txt file. You can also provide a custom wordlist for permutations with the -pw or --permutation-wordlist argument, followed by the file name.An example run would be:

lepus.py --permutate yahoo.com

or

lepus.py --permutate -pw customsubdomains.txt yahoo.com

ReverseDNS

The ReverseDNS mode will gather all IP addresses that were resolved and perform a reverse DNS on each one in order to detect more subdomains. For example, if www.example.com resolves to 1.2.3.4, lepus will perform a reverse DNS for 1.2.3.4 and gather any other subdomains belonging to example.com, e.g. www2,internal or oldsite.

To run the ReverseDNS module use the --reverse argument. Additionally, --ripe (or -ripe) can be used in order to instruct the module to query the RIPE database using the second level domain for potential network ranges. Moreover, lepus supports the --ranges (or -r) argument. You can use it to make reverse DNS resolutions against CIDRs that belong to the target domain.

By default this module will take into account all previously identified IPs, then defined ranges, then ranges identified through the RIPE database. In case you only want to run the module against specific or RIPE identified ranges, and not against all already identified IPs, you can use the --only-ranges (-or) argument.

An example run would be:

lepus.py --reverse yahoo.com

or

lepus.py --reverse -ripe -r 172.216.0.0/16,183.177.80.0/23 yahoo.com

or only against the defined or identified from RIPE

lepus.py --reverse -or -ripe -r 172.216.0.0/16,183.177.80.0/23 yahoo.com

Hint: lepus will identify ASNs and Networks during enumeration, so you can also use these ranges to identify more subdomains with a subsequent run.

Markov

With this module, Lepus will utilize Markov chains in order to train itself and then generate subdomain based on the already known ones. The bigger the general surface, the better the tool will be able to train itself and subsequently, the better the results will be.

The module can be activated with the --markovify argument. Parameters also include the Markov state size, the maximum length of the generated candidate addition, and the quantity of generated candidates. Predefined values are 3, 5 and 5 respectively. Those arguments can be changed with -ms (--markov-state), -ml (--markov-length) and -mq (--markov-quantity) to meet your needs. Keep in mind that the larger these values are, the more time Lepus will need to generate the candidates.

It has to be noted that different executions of this module might generate different candidates, so feel free to run it a few times consecutively. Keep in mind that the higher the -ms, -ml and -mq values, the more time will be needed for candidate generation.

lepus.py --markovify yahoo.com

or

lepus.py --markovify -ms 5 -ml 10 -mq 10

Subdomain Takeover

Lepus has a list of signatures in order to identify if a domain can be taken over. You can use it by providing the --takeover argument. This module also supports Slack notifications, once a potential takeover has been identified, by adding a Slack token in the config.ini file. The checks are made against the following services:

  • Acquia
  • Activecampaign
  • Aftership
  • Aha!
  • Airee
  • Amazon AWS/S3
  • Apigee
  • Azure
  • Bigcartel
  • Bitbucket
  • Brightcove
  • Campaign Monitor
  • Cargo Collective
  • Desk
  • Feedpress
  • Fly.io
  • Getresponse
  • Ghost.io
  • Github
  • Hatena
  • Helpjuice
  • Helpscout
  • Heroku
  • Instapage
  • Intercom
  • JetBrains
  • Kajabi
  • Kayako
  • Launchrock
  • Mashery
  • Maxcdn
  • Moosend
  • Ning
  • Pantheon
  • Pingdom
  • Readme.io
  • Simplebooklet
  • Smugmug
  • Statuspage
  • Strikingly
  • Surge.sh
  • Surveygizmo
  • Tave
  • Teamwork
  • Thinkific
  • Tictail
  • Tilda
  • Tumblr
  • Uptime Robot
  • UserVoice
  • Vend
  • Webflow
  • Wishpond
  • Wordpress
  • Zendesk

Port Scan

The port scan module will check open ports against a target and log them in the results. You can use the --portscan argument which by default will scan ports 80, 443, 8000, 8080, 8443. You can also use custom ports or choose a predefined set of ports.

Ports set Ports
small 80, 443
medium (default) 80, 443, 8000, 8080, 8443
large 80, 81, 443, 591, 2082, 2087, 2095, 2096, 3000, 8000, 8001, 8008, 8080, 8083, 8443, 8834, 8888, 9000, 9090, 9443
huge 80, 81, 300, 443, 591, 593, 832, 981, 1010, 1311, 2082, 2087, 2095, 2096, 2480, 3000, 3128, 3333, 4243, 4567, 4711, 4712, 4993, 5000, 5104, 5108, 5800, 6543, 7000, 7396, 7474, 8000, 8001, 8008, 8014, 8042, 8069, 8080, 8081, 8088, 8090, 8091, 8118, 8123, 8172, 8222, 8243, 8280, 8281, 8333, 8443, 8500, 8834, 8880, 8888, 8983, 9000, 9043, 9060, 9080, 9090, 9091, 9200, 9443, 9800, 9943, 9980, 9981, 12443, 16080, 18091, 18092, 20720, 28017

An example run would be:

lepus.py --portscan yahoo.com

or

lepus.py --portscan -p huge yahoo.com

or

lepus.py --portscan -p 80,443,8082,65123 yahoo.com

Installation

  1. Normal installation:

    $ python3.7 -m pip install -r requirements.txt
    
  2. Preferably install in a virtualenv:

    $ pyenv virtualenv 3.7.4 lepus
    $ pyenv activate lepus
    $ pip install -r requirements.txt
    
  3. Installing latest python on debian:

    $ apt install build-essential zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev libsqlite3-dev wget
    $ curl -O https://www.python.org/ftp/python/3.7.4/Python-3.7.4.tar.xz
    $ tar -xf Python-3.7.4.tar.xz
    $ cd Python-3.7.4
    $ ./configure --enable-optimizations --enable-loadable-sqlite-extensions
    $ make
    $ make altinstall
    

Arguments

usage: lepus.py [-h] [-w WORDLIST] [-hw] [-t THREADS] [-nc] [-zt]
                [--permutate] [-pw PERMUTATION_WORDLIST] [--reverse]
                [-r RANGES] [--portscan] [-p PORTS] [--takeover] [--markovify]
                [-ms MARKOV_STATE] [-ml MARKOV_LENGTH] [-mq MARKOV_QUANTITY]
                [-f] [-v]
                domain

Infrastructure OSINT

positional arguments:
  domain                domain to search

optional arguments:
  -h, --help            show this help message and exit
  -w WORDLIST, --wordlist WORDLIST
                        wordlist with subdomains
  -hw, --hide-wildcards
                        hide wildcard resolutions
  -t THREADS, --threads THREADS
                        number of threads [default is 100]
  -nc, --no-collectors  skip passive subdomain enumeration
  -zt, --zone-transfer  attempt to zone transfer from identified name servers
  --permutate           perform permutations on resolved domains
  -pw PERMUTATION_WORDLIST, --permutation-wordlist PERMUTATION_WORDLIST
                        wordlist to perform permutations with [default is
                        lists/words.txt]
  --reverse             perform reverse dns lookups on resolved public IP
                        addresses
  -ripe, --ripe         query ripe database with the 2nd level domain 
                        for networks to be used for reverse lookups
  -r RANGES, --ranges RANGES
                        comma seperated ip ranges to perform reverse dns
                        lookups on
  -or, --only-ranges    use only ranges provided with -r or -ripe and not all
                        previously identifed IPs
  --portscan            scan resolved public IP addresses for open ports
  -p PORTS, --ports PORTS
                        set of ports to be used by the portscan module
                        [default is medium]
  --takeover            check identified hosts for potential subdomain take-
                        overs
  --markovify           use markov chains to identify more subdomains
  -ms MARKOV_STATE, --markov-state MARKOV_STATE
                        markov state size [default is 3]
  -ml MARKOV_LENGTH, --markov-length MARKOV_LENGTH
                        max length of markov substitutions [default is 5]
  -mq MARKOV_QUANTITY, --markov-quantity MARKOV_QUANTITY
                        max quantity of markov results per candidate length
                        [default is 5]
  -f, --flush           purge all records of the specified domain from the
                        database
  -v, --version         show program's version number and exit

Full command example

The following, is an example run with all available active arguments:

./lepus.py python.org --wordlist lists/subdomains.txt --permutate -pw ~/mypermsword.lst --reverse -ripe -r 10.11.12.0/24 --portscan -p huge --takeover --markovify -ms 3 -ml 10 -mq 10

The following command flushes all database entries for a specific domain:

./lepus.py python.org --flush

 

Sursa: https://github.com/GKNSB/Lepus

  • Thanks 1
  • Upvote 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...