Jump to content
t_jst

Inghetare ecran / blocare calculator / ecran albastru.

Recommended Posts

Salutare.

Am o problema cu al meu calculator.

Din cand in cand (banuiala mea e ca atunci cand procesorul este prea incarcat) calculatorul se blocheaza sau apare un ecran albastru cu mult scris pe el.

Am schimbat mai toate componentele din el cu exceptia hard discului.

Utilizand programul HD Tune Pro am obtinut urmatoarele date (de mai jos) problema e ca nu stiu sa le interpretez.

E posibil ca problemele pe care le am sa fie datorate hard-ului ?

Multumesc, o seara frumoasa !

HD Tune Pro: Maxtor 6E040L0 Benchmark

Test capacity: full

Read transfer rate

Transfer Rate Minimum : 8.5 MB/s

Transfer Rate Maximum : 29.2 MB/s

Transfer Rate Average : 27.4 MB/s

Access Time : 15.3 ms

Burst Rate : 30.8 MB/s

CPU Usage : 13.0%

HD Tune Pro: Maxtor 6E040L0 Information

Firmware version : NAR61EA0

Serial number : E1RJL37E

Capacity : 38.5 gB (35.9 GB)

Buffer size : 2048 KB

Sector size : 512 bytes

Standard : ATA/ATAPI-7

Supported mode : UDMA Mode 6

Current mode : UDMA Mode 2

Avergae speed : -

Rotation speed : -

S.M.A.R.T : yes

48-bit Address : no

Read Look-Ahead : yes

Write Cache : yes

Host Protected Area : yes

Device Configuration Overlay : yes

Firmware Upgradable : yes

Automatic Acoustic Management: yes

Power Management : yes

Advanced Power Management : yes

Interface Power Management : no

Power-up in Standby : no

Security Mode : yes

SCT Tables : no

Native Command Queuing (NCQ) : no

Trim : no

Volume : (C:)

Capacity : 14998 MB

Free : 12505 MB

Usage : 17%

File system : NTFS

Serial : 40A0-A443

Alignment : 0.5 KB

Volume : (D:)

Capacity : 21691 MB

Free : 16008 MB

Usage : 26%

File system : NTFS

Serial : 54CB-9E85

Alignment : 0.5 KB

HD Tune Pro: Maxtor 6E040L0 Health

ID Current Worst ThresholdData Status

(03) Spin Up Time 222 220 63 7348 ok

(04) Start/Stop Count 252 252 0 3857 ok

(05) Reallocated Sector Count 251 251 63 13 warning

(06) Read Channel Margin 253 253 100 0 ok

(07) Seek Error Rate 253 252 0 0 ok

(08) Seek Time Performance 251 243 187 33466 ok

(09) Power On Hours Count 236 236 0 37512 ok

(0A) Spin Retry Count 253 252 157 0 ok

(0B) Calibration Retry Count 253 252 223 0 ok

(0C) Power Cycle Count 242 242 0 4495 ok

(C0) Unsafe Shutdown Count 250 250 0 3399 ok

(C1) Load Cycle Count 251 251 0 10154 ok

(C2) Temperature 253 253 0 33 ok

(C3) Hardware ECC Recovered 253 252 0 1671 ok

(C4) Reallocated Event Count 253 253 0 0 ok

(C5) Current Pending Sector 253 253 0 0 ok

(C6) Offline Uncorrectable 252 252 0 1 ok

(C7) Interface CRC Error Count 199 198 0 1 attention

(C8) Write Error Rate 253 252 0 0 ok

(C9) Soft Read Error Rate 253 252 0 0 ok

(CA) Data Address Marker errors 253 252 0 0 ok

(CB) Run Out Cancel 253 252 180 0 ok

(CC) Soft ECC Correction 253 252 0 0 ok

(CD) Thermal Asperity Rate 253 252 0 0 ok

(CF) Spin High Current 253 252 0 0 ok

(D0) Spin Buzz 253 252 0 0 ok

(D1) Offline Seek Performance 187 186 0 0 ok

(63) Unknown Attribute 253 253 0 0 ok

(64) Unknown Attribute 253 253 0 0 ok

(65) Unknown Attribute 253 253 0 0 ok

Health Status : warning

HD Tune Pro: Maxtor 6E040L0 Error Scan

Scanned data : 38 gB

Damaged Blocks : 0.0 %

Elapsed Time : 24:21

Link to comment
Share on other sites

Salut in legatura cu problema ta mentionata in acest post . Te voi ajuta cu cea mai mare placere .

Problema este urmatoarea :

1. Hard-Disk-ul tau are bad-uri ( sectoare moarte , fizice sau logice) , te voi sfatui sa descarci Hiren'sBooTCd si cat poti tu de repede iti achizitionezi un stick sau un dvd si cu ajutorul programului Rufus - pt stick si CdBurn pentru dvd iti inscriptionezi imaginea iso a hirens'ului si te pui sa scanezi foarte amanuntit hard-diskul ca nu e de gluma din descrierea spusa de tine

2. Dupa ce ai terminat de scanat cu hiren's boot faci un reinstall os

3. Dupa ce-ai facut reinstalul de os , vei descarca driver booster si il vei lasa sa faca el update de drivere

Link Download :

1. Hirens Boot Cd : Download Hiren’s BootCD 15.2 | HBCD Fan & Discussion Platform

2. Windows 7 Ultimate Original oferit de catre mine

Windows 7 Ultimate x64 : http://msft.digitalrivercontent.net/win/X17-59465.iso

Windows 7 Ultimate x86 (32biti) : http://msft.digitalrivercontent.net/win/X17-59463.iso

Spor la treaba si astept un raspuns de la tine , cu cea mai mare placere te voi ajuta in caz de nu se va rezolva !

Link to comment
Share on other sites

Salut Erase.

Am downloadat o versiune mai veche de HirensBootCD care avea HDD Regenerator in lod de HDAT si am pus-o cu ajutorul programului RUFUS pe un stick usb. Ideea e ca nu pot intra in meniu sau nu stiu cum sa fac lucrul asta.

Ultima versiune a intrat direct acolo.

Sugestii legate de versiunile mai vechi ?

Cum accesez meniul sa pot selecta HDD Regenerator ?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...