Usr6 Posted January 21, 2018 Report Posted January 21, 2018 First, why would you do this? Why not. It's awesome. It's a learning experience. It's cheaper to get 6 pis than six "real computers." It's somewhat portable. While you can certainly quickly and easily build a Kubernetes Cluster in the cloud within your browser using a Cloud Shell, there's something more visceral about learning it this way, IMHO. Additionally, it's a non-trivial little bit of power you've got here. This is also a great little development cluster for experimenting. I'm very happy with the result. By the end of this blog post you'll have not just Hello World but you'll have Cloud Native Distributed Containerized RESTful microservice based on ARMv7 w/ k8s Hello World! as a service. (original Tweet). Not familiar with why Kubernetes is cool? Check out Julia Evans' blog and read her K8s posts and you'll be convinced! Hardware List (scroll down for Software) Here's your shopping list. You may have a bunch of this stuff already. I had the Raspberry Pis and SD Cards already. 6 - Raspberry Pi 3 - I picked 6, but you should have at least 3 or 4. One Boss/Master and n workers. I did 6 because it's perfect for the power supply, perfect for the 8-port hub, AND it's a big but not unruly number. 6 - Samsung 32Gb Micro SDHC cards - Don't be too cheap. Faster SD cards are better. 2x6 - 1ft flat Ethernet cables - Flat is the key here. They are WAY more flexible. If you try to do this with regular 1ft cables you'll find them inflexible and frustrating. Get extras. 1 - Anker PowerPort 6 Port USB Charging Hub - Regardless of this entire blog post, this product is amazing. It's almost the same physical size as a Raspberry Pi, so it fits perfect at the bottom of your stack. It puts out 2.4a per port AND (wait for it) it includes SIX 1ft Micro USB cables...perfect for running 6 Raspberry Pis with a single power adapter. 1 - 7 layer Raspberry Pi Clear Case Enclosure - I only used 6 of these, which is cool. I love this case, and it looks fantastic. 1 - Black Box USB-Powered 8-Port Switch - This is another amazing and AFAIK unique product. An overarching goal for this little stack is that it be easy to move around and set up but also to power. We have power to spare, so I'd like to avoid a bunch of "wall warts" or power adapters. This is an 8 port switch that can be powered over a Raspberry Pi's USB. Because I'm given up to 2.4A to each micro USB, I just plugged this hub into one of the Pis and it worked no problem. It's also...wait for it...the size of a Pi. It also include magnets for mounting. 1 - Some Small Router - This one is a little tricky and somewhat optional. You can just put these Pis on your own Wifi and access them that way, but you need to think about how they get their IP address. Who doles out IPs via DHCP? Static Leases? Static IPs completely? The root question is - How portable do you want this stack to be? I propose you give them their own address space and their own router that you then use to bridge to other places. Easiest way is with another router (you likely have one lying around, as I did. Could be any router...and remember hub/switch != router. Here is a bad network diagram that makes the point, I think. The idea is that I should be able to go to a hotel or another place and just plug the little router into whatever external internet is available and the cluster will just work. Again, not needed unless portability matters to you as it does to me. You could ALSO possibly get this to work with a Travel Router but then the external internet it consumed would be just Wifi and your other clients would get on your network subnet via Wifi as well. I wanted the relative predictability of wired. What I WISH existed was a small router - similar to that little 8 port hub - that was powered off USB and had an internal and external Ethernet port. This ZyXEL Travel Router is very close...hm... Optional - Pelican Case if you want portability. I'll see what airport security thinks. O_O Optional - Tiny Keyboard and Mouse - Raspberry Pis can put out about 500mA per port for mice and keyboards. The number one problem I see with Pis is not giving them enough power and/or then having an external device take too much and then destabilize the system. This little keyboard is also a touchpad mouse and can be used to debug your Pi when you can't get remote access to it. You'll also want an HMDI cable occasionally. You're Rich - If you have money to burn, get the 7" Touchscreen Display and a Case for it, just to show off htop in color on one of the Pis. Dodgey Network Diagram Disclaimer OK, first things first, a few disclaimers. The software in this space is moving fast. There's a non-zero chance that some of this software will have a new version out before I finish this blog post. In fact, when I was setting up Kubernetes, I created a few nodes, went to bed for 6 hours, came back and made a few more nodes and a new version had come out. Try to keep track, keep notes, and be aware of what works with what. Next, I'm just learning this stuff. I may get some of this wrong. While I've built (very) large distributed systems before, my experience with large orchestrators (primarily in banks) was with large proprietary ones in Java, C++, COM, and later in C#, .NET 1.x,2.0, and WCF. It's been really fascinating to see how Kubernetes thinks about these things and comparing it to how we thought about these things in the 90s and very early 2000s. A lot of best practices that were HUGE challenges many years ago are now being codified and soon, I hope, will "just work" for a new generation of developer. At least another full page of my resume is being marked [Obsolete] and I'm here for it. Things change and they are getting better. Software Get your Raspberry PIs and SD cards together. Also bookmark and subscribe to Alex Ellis' blog as you're going to find yourself there a lot. He's the author of OpenFaas, which I'll be using today and he's done a LOT of work making this experiment possible. So thank you Alex for being awesome! He has a great post on how Multi-stage Docker files make it possible to effectively use .NET Core on a Raspberry Pi while still building on your main machine. He and I spent a few late nights going around and around to make this easy. Alex has put together a Gist we iterated on and I'll summarize here. You'll do these instructions n times for all machines. You'll do special stuff for the ONE master/boss node and different stuff for the some number of worker nodes. ADVANCED TIP! If you know what you're doing Linux-wise, you should save this excellent prep.sh shell script that Alex made, then SKIP to the node-specific instructions below. If you want to learn more, do it step by step. ALL NODES Burn Jessie to a SD Card You're going to want to get a copy of Raspbian Jesse Lite and burn it to your SD Cards with Etcher, which is the only SD Card Burner you need. It's WAY better than the competition and it's open source. You can also try out Hypriot and their "optimized docker image for Raspberry Pi" but I personally tried to get it working reliably for a two days and went back to Jesse. No disrespect. Creating an empty file called "ssh" before you put the card in the Raspberry Pi SSH into the new Pi I'm on Windows so I used WSL (Ubuntu) for Windows that lets me SSH and do run Linux natively. ssh pi@raspberrypi Login pi, password raspberry. Change the Hostname I ran rasbpi-config then immediately reboot with "sudo reboot" Install Docker curl -sSL get.docker.com | sh && \ sudo usermod pi -aG docker Disable Swap. Important, you'll get errors in Kuberenetes otherwise sudo dphys-swapfile swapoff && \ sudo dphys-swapfile uninstall && \ sudo update-rc.d dphys-swapfile remove Go edit /boot/cmdline.txt with your favorite editor, or use sudo nano /boot/cmdline and add this at the very end. Don't press enter. cgroup_enable=cpuset cgroup_enable=memory Install Kubernetes curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | sudo apt-key add - && \ echo "deb http://apt.kubernetes.io/ kubernetes-xenial main" | sudo tee /etc/apt/sources.list.d/kubernetes.list && \ sudo apt-get update -q && \ sudo apt-get install -qy kubeadm MASTER/BOSS NODE After ssh'ing into my main node, I used /ifconfig eth0 to figure out what the IP adresss was. Ideally you want this to be static (not changing) or at least a static lease. I logged into my router and set it as a static lease, so my main node ended up being 192.168.170.2, and .1 is the router itself. Then I initialized this main node sudo kubeadm init --apiserver-advertise-address=192.168.170.2 This took a WHILE. Like 10-15 min, so be patient. Kubernetes uses this admin.conf for a ton of stuff, so you're going to want a copy in your $HOME folder so you can call "kubectl" easily later, copy it and take ownership. mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config When this is done, you'll get a nice print out with a ton of info and a token you have to save. Save it all. I took a screenshot. WORKER NODES Ssh into your worker nodes and join them each to the main node. This line is the line you needed to have saved above when you did a kubectl init. kubeadm join --token d758dc.059e9693bfa5 192.168.170.2:6443 --discovery-token-ca-cert-hash sha256:c66cb9deebfc58800a4afbedf0e70b93c086d02426f6175a716ee2f4d Did it work? While ssh'ed into the main node - or from any networked machine that has the admin.conf on it - try a few commands. Here I'm trying "kubectl get nodes" and "kubectl get pods." Note that I already have some stuff installed, so you'll want try "kubectl get pods --namespace kube-system" to see stuff running. If everything is "Running" then you can finish setting up networking. Kubernetes has fifty-eleven choices for networking and I'm not qualified to pick one. I tried Flannel and gave up and then tried Weave and it just worked. YMMV. Again, double check Alex's Gist if this changes. kubectl apply -f https://git.io/weave-kube-1.6 At this point you should be ready to run some code! Hello World...with Markdown Back to Alex's gist, I'll try this "markdownrender" app. It will take some Markdown and return HTML. Go get the function.yml from here and create the new app on your new cluster. $ kubectl create -f function.yml $ curl -4 http://localhost:31118 -d "# test" <p><h1>test</h1></p> This part can be tricky - it was for me. You need to understand what you're doing here. How do we know the ports? A few ways. First, it's listed as nodePort in the function.yml that represents the desired state of the application. We can also run "kubectl get svc" and see the ports for various services. pi@hanselboss1:~ $ kubectl get svc NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE alertmanager NodePort 10.103.43.130 <none> 9093:31113/TCP 1d dotnet-ping ClusterIP 10.100.153.185 <none> 8080/TCP 1d faas-netesd NodePort 10.103.9.25 <none> 8080:31111/TCP 2d gateway NodePort 10.111.130.61 <none> 8080:31112/TCP 2d http-ping ClusterIP 10.102.150.8 <none> 8080/TCP 1d kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 2d markdownrender NodePort 10.104.121.82 <none> 8080:31118/TCP 1d nodeinfo ClusterIP 10.106.2.233 <none> 8080/TCP 1d prometheus NodePort 10.98.110.232 <none> 9090:31119/TCP 2d See those ports that are outside:insider? You can get to markdownrender directly from 31118 on an internal IP like localhost, or the main/master IP. Those 10.x.x.x are all software networking, you can not worry about them. See? pi@hanselboss1:~ $ curl -4 http://192.168.170.2:31118 -d "# test" <h1>test</h1> pi@hanselboss1:~ $ curl -4 http://10.104.121.82:31118 -d "# test" curl: (7) Failed to connect to 10.104.121.82 port 31118: Network is unreachable Can we access this cluster from another machine? My Windows laptop, perhaps? Access your Raspberry Pi Kubernetes Cluster from your Windows Machine (or elsewhere) I put KubeCtl on my local Windows machine put it in the PATH. I copied the admin.conf over from my Raspberry Pi. You will likely use scp or WinSCP. I made a little local batch file like this. I may end up with multiple clusters and I want it easy to switch between them. SET KUBECONFIG="C:\users\scott\desktop\k8s for pi\admin.conf Once you have Kubectl on another machine that isn't your Pi, try running "kubectl proxy" and see if you can hit your cluster like this. Remember you'll get weird "Connection refused" if kubectl thinks you're talking to a local cluster. Here you can get to localhost:8001/api and move around, then you've successfully punched a hole over to your cluster (proxied) and you can treat localhost:8001 as your cluster. So "kubectl proxy" made that possible. If you have WSL (Windows Subsystem for Linux) - and you should - then you could also do this and TUNNEL to the API. But I'm going to get cert errors and generally get frustrated. However, tunneling like this to other apps from Windows or elsewhere IS super useful. What about the Kubernetes Dashboard? ~ $ sudo ssh -L 8001:10.96.0.1:443 pi@192.168.170.2 I'm going to install the Kubernetes Dashboard like this: kubectl apply -f https://raw.githubusercontent.com/kubernetes/dashboard/master/src/deploy/alternative/kubernetes-dashboard-arm.yaml Pay close attention to that URL! There are several sites out there that may point to older URLs, non ARM dashboard, or use shortened URLs. Make sure you're applying the ARM dashboard. I looked here https://github.com/kubernetes/dashboard/tree/master/src/deploy. Notice I'm using the "alternative" dashboard. That's for development and I'm saying I don't care at all about security when accessing it. Be aware. I can see where my Dashboard is running, the port and the IP address. pi@hanselboss1:~ $ kubectl get svc --namespace kube-system NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE kube-dns ClusterIP 10.96.0.10 <none> 53/UDP,53/TCP 2d kubernetes-dashboard ClusterIP 10.98.2.15 <none> 80/TCP 2d NOW I can punch a hole with that nice ssh tunnel... ~ $ sudo ssh -L 8080:10.98.2.15:80 pi@192.168.170.2 I can access the Kubernetes Dashboard now from my Windows machine at http://localhost:8080 and hit Skip to login. Do note the Namespace dropdown and think about what you're viewing. There's the kube-system stuff that manages the cluster Adding OpenFaas and calling a serverless function Let's go to the next level. We'll install OpenFaas - think Azure Functions or Amazon Lambda, except for your own Docker and Kubernetes cluster. To be clear, OpenFaas is an Application that we will run on Kubernetes, and it will make it easier to run other apps. Then we'll run other stuff on it...just some simple apps like Hello World in Python and .NET Core. OpenFaas is one of several open source "Serverless" solutions. Do you need to use OpenFaas? No. But if your goal is to write a DoIt() function and put it on your little cluster easily and scale it out, it's pretty fabulous. Remember my definition of Serverless...there ARE servers, you just don't think about them. Serverless Computing is like this - Your code, a slider bar, and your credit card. Let's go. .NET Core on OpenFaas on Kubernetes on Raspberry Pi I ssh'ed into my main/master cluster Pi and set up OpenFaas: git clone https://github.com/alexellis/faas-netes && cd faas-netes kubectl apply -f faas.armhf.yml,rbac.yml,monitoring.armhf.yml Once OpenFaas is installed on your cluster, here's Alex's great instructions on how to setup your first OpenFaas Python function, so give that a try first and test it. Once we've installed that Python function, we can also hit http://192.168.170.2:31112/ui/ (where that's your main Boss/Master's IP) and see it the OpenFaas UI. OpenFaas and the "faas-netes" we setup above automates the build and deployment of our apps as Docker Images to Kuberetes. It makes the "Developer's Inner Loop" simpler. I'm going to make my .NET app, build, deploy, then change, build, deploy and I want it to "just work" on my cluster. And later, and I want it to scale. I'm doing .NET Core, and since there is a runtime for .NET Core for Raspberry Pi (and ARM system) but no SDK, I need to do the build on my Windows machine and deploy from there. Quick Aside: There are docker images for ARM/Raspberry PI for running .NET Core. However, you can't build .NET Core apps (yet?) directly ON the ARM machine. You have to build them on an x86/x64 machine and then get them over to the ARM machine. That can be SCP/FTPing them, or it can be making a docker container and then pushing that new docker image up to a container registry, then telling Kubernetes about that image. K8s (cool abbv) will then bring that ARM image down and run it. The technical trick that Alex and I noticed was of course that since you're building the Docker image on your x86/x64 machine, you can't RUN any stuff on it. You can build the image but you can't run stuff within it. It's an unfortunate limitation for now until there's a .NET Core SDK on ARM. What's required on my development machine (not my Raspberry Pis? I installed KubeCtl (see above) in the PATH I installed OpenFaas's Faas-CLI command line and put it in the PATH I installed Docker for Windows. You'll want to make sure your machine has some flavor of Docker if you have a Mac or Linux machine. I ran docker login at least once. I installed .NET Core from http://dot.net/core Here's the gist we came up with, again thanks Alex! I'm going to do it from Windows. I'll use the faas-cli to make a new function with charp. I'm calling mine dotnet-ping. faas-cli new --lang csharp dotnet-ping I'll edit the FunctionHandler.cs to add a little more. I'd like to know the machine name so I can see the scaling happen when it does. using System; using System.Text; namespace Function { public class FunctionHandler { public void Handle(string input) { Console.WriteLine("Hi your input was: "+ input + " on " + System.Environment.MachineName); } } } Check out the .yml file for your new OpenFaas function. Note the gateway IP should be your main Pi, and the port is 31112 which is OpenFaas. I also changed the image to include "shanselman/" which is my Docker Hub. You could also use a local Container Registry if you like. provider: name: faas gateway: http://192.168.170.2:31112 functions: dotnet-ping: lang: csharp handler: ./dotnet-ping image: shanselman/dotnet-ping Head over to the ./template/csharp/Dockerfile and we're going to change it. Ordinarily it's fine if you are publishing from x64 to x64 but since we are doing a little dance, we are going to build and publish the .NET apps as linux-arm from our x64 machine, THEN push it, we'll use a multi stage docker file. Change the default Docker file to this: FROM microsoft/dotnet:2.0-sdk as builder ENV DOTNET_CLI_TELEMETRY_OPTOUT 1 # Optimize for Docker builder caching by adding projects first. RUN mkdir -p /root/src/function WORKDIR /root/src/function COPY ./function/Function.csproj . WORKDIR /root/src/ COPY ./root.csproj . RUN dotnet restore ./root.csproj COPY . . RUN dotnet publish -c release -o published -r linux-arm ADD https://github.com/openfaas/faas/releases/download/0.6.1/fwatchdog-armhf /usr/bin/fwatchdog RUN chmod +x /usr/bin/fwatchdog FROM microsoft/dotnet:2.0.0-runtime-stretch-arm32v7 WORKDIR /root/ COPY --from=builder /root/src/published . COPY --from=builder /usr/bin/fwatchdog / ENV fprocess="dotnet ./root.dll" EXPOSE 8080 CMD ["/fwatchdog"] Notice a few things. All the RUN commands are above the second FROM where we take the results of the first container and use its output to build the second ARM-based one. We can't RUN stuff because we aren't on ARM, right? We use the Faas-Cli to build the app, build the docker container, AND publish the result to Kubernetes. faas-cli build -f dotnet-ping.yml --parallel=1 faas-cli push -f dotnet-ping.yml faas-cli deploy -f dotnet-ping.yml --gateway http://192.168.170.2:31112 And here is the dotnet-ping command running on the pi, as seen within the Kubernetes Dashboard. I can then scale them out like this: kubectl scale deploy/dotnet-ping --replicas=6 And if I hit it multiple times - either via curl or via the dashboard, I see it's hitting different pods: If I want to get super fancy, I can install Grafana - a dashboard manager by running locally in my machine on port 3000 docker run -p 3000:3000 -d grafana/grafana Then I can add OpenFaas a datasource by pointing Grafana to http://192.168.170.2/31119 which is where the Prometheus metrics app is already running, then import the OpenFaas dashboard from the grafana.json file that is in the I cloned it from. Super cool. I'm going to keep using this little Raspberry Pi Kubernetes Cluster to learn as I get ready to do real K8s in Azure! Thanks to Alex Ellis for his kindness and patience and to Jessie Frazelle for making me love both Windows AND Linux! * If you like this blog, please do use my Amazon links as they help pay for projects like this! They don't make me rich, but a few dollars here and there can pay for Raspberry Pis! Sursa: https://www.hanselman.com/blog/HowToBuildAKubernetesClusterWithARMRaspberryPiThenRunNETCoreOnOpenFaas.aspx Linkuri utile: https://kubernetes.io/ https://blog.giantswarm.io/understanding-basic-kubernetes-concepts-i-introduction-to-pods-labels-replicas/ https://dev.to/danielkun/kubernetes-its-alive-2ndc https://www.amazon.com/Kubernetes-Running-Dive-Future-Infrastructure/dp/1491935677/ref=sr_1_1?ie=UTF8&qid=1516176454&sr=8-1&keywords=kubernetes+up+and+running https://jvns.ca/categories/kubernetes/ 1 1 Quote
