pyth0n3 Posted April 11, 2010 Report Share Posted April 11, 2010 Download :http://www.logicallysecure.com/resources/downloads/Linux%20Wireless%20Commands.docSource: Wireless Security 802.11 Security Wirelessdefence.org Index Quote Link to comment Share on other sites More sharing options...
RoseJan Posted August 3, 2010 Report Share Posted August 3, 2010 I used the net inst CD. I can install it again no problem, and change all the settings for network, which are probably wrong anyway.Here are the details:I can connect to the router using a USB, if there is a way to configure that in Debian, that would be very helpful, please note i only have the basics of Debian just now - command line...Wireless is improbable just now, at least until i get connected using the USB. Quote Link to comment Share on other sites More sharing options...
pyth0n3 Posted August 3, 2010 Author Report Share Posted August 3, 2010 I used the net inst CD. I can install it again no problem, and change all the settings for network, which are probably wrong anyway.Here are the details:I can connect to the router using a USB, if there is a way to configure that in Debian, that would be very helpful, please note i only have the basics of Debian just now - command line...Wireless is improbable just now, at least until i get connected using the USB.Must edit the file /etc/network/interfaces Here is an example for the wireless configuration file # This file describes the network interfaces available on your system# and how to activate them. For more information, see interfaces(5).# The loopback network interfaceauto loiface lo inet loopback#the wifi network interface# my wifi interface is called rausb0,# I knew that by typing ifconfig and iwconfig (see below)auto rausb0iface rausb0 inet dhcp wireless-essid my_essid wireless-mode managed wireless-key AF32852BE7A39B522BG60C4353# The wep key which appear here is just an example. This is not# really my web key, which is secretIf you have access to a GUI based interface you can install the wicd , cause is better than the default one Wicd 1.5.9 is included in Debian Squeeze and Sid, so you can just use apt-get install to get it. In Debian Lenny, 1.5.9 is a backport, so installing it requires additional work. Add this to /etc/apt/sources.list: deb Index of /debian lenny-backports main contrib non-free Follow this with apt-get update and then apt-get -t lenny-backports install wicd. For those running Debian experimental, 1.6 is in the main repository. Quote Link to comment Share on other sites More sharing options...