Onofreian Posted January 4, 2013 Report Posted January 4, 2013 Am un Nokia 6120c ma mincat in ... sa ma joc cu J.A.F iar dupa vreo 3 uploduri de Fw am primit acceasta eroare la pornirea lui cu Sim-SIM card not valid ! Stie careva din ce cauza , se mai poate face ceva?Nokia 6120c-1IC-661E-RM243I-MEI 356252017316156MADE IN HUNGARY Quote
bubu2005 Posted January 5, 2013 Report Posted January 5, 2013 Incerca cartela in alt tel vezi daca merge mie 2 cartele sau dus in decurs de o luna cica s-au magnetizat Quote
dixongsm Posted January 5, 2013 Report Posted January 5, 2013 F? info ?i pune log aici s? vedem ?i noi. Dac? ai f?cut downgrade la firmware sper c? ai f?cut backup la RPL.Notificarea: SIM card not valid apare când ai telefonul blocat într-o anumit? re?ea sau când ai SIMLOCK invalid. De regul?, când ai stricat simlock-ul telefonul intr? în contact service, dar nu-i o regul? general? pentru toate modelele de nokia. Quote
Onofreian Posted January 5, 2013 Author Report Posted January 5, 2013 (edited) JAF version 1.98.62Detected PKEY: 90009699Card life counter: 99.99%P-key nokia module version 01.02FBUS INTERFACE NOT CONNECTED!!!USB Cable Driver version: 7.1.78.0Changing mode...Done!FILES SET FOR FLASHING:MCU Flash file: NONEPPM Flash file: NONECNT Flash file: NONEAPE Variant file: NONESearching for JAF saved location of ini...Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\Searching for default location of ini...Checking path: C:\Program Files\Nokia\phoenix\products\RM-78\Products\RM-243\Searching for JAF saved location of ini...Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\Scanning ini files...Searching for default location of ini...Checking path: C:\Program Files\Nokia\phoenix\products\RM-78\Products\RM-243\Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\FILES SET FOR FLASHING:MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_core.fpsxPPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_ENO_A_2009wk15v0.100.fpsxCNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_vEM9D_02_euro3.fpsxAPE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_uda_vEM9D_01_euro3.fpsxDetected P-KEY: 90009699P-key nokia module version 01.02Init usb communication...PRESS POWER ON NOW!Searching for phone...FoundSending RAW loader...Using 006.044.048 Elf2flash 09.14.000 CMT RAW loader...Patching RAW boot step1...Patching RAW boot step2...Patching RAW boot step3...Sending RAW Loader.......................Loader Sent!Stage 2 starting....................Phone prepared OK!Waiting for the phone to boot...Searching for phone...Status byte: 0600Selecting CMT flash...Result: 0000Phone is in flash mode...CMT blocks: 613, APE blocks: 0Erasing cmt...Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_core.fpsx...Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000Erasing cmt zone 00083400 - 0087FFFF ... Erase result: 0000Erasing cmt zone 00B80000 - 04DFFFFF ... Erase result: 0000Partition result: 0014Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_ENO_A_2009wk15v0.100.fpsx...Erasing cmt zone 00880000 - 00B7FFFF ... Erase result: 0000Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_vEM9D_02_euro3.fpsx...Erasing cmt zone 03300000 - 04DFFFFF ... Erase result: 0000Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_uda_vEM9D_01_euro3.fpsx...Erasing cmt zone 04E00000 - 07B3FFFF ... Erase result: 0000Send CMT CFG...Writing cmt...Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_core.fpsx...Sending CMT HASH for ADASending CMT HASH for KEYSSending CMT HASH for PRIMAPPSending CMT HASH for RAP3NANDSending CMT HASH for PASUBTOCcmt->PAPUB_CERTIFICATE_DATA_BB5 block detectedcmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending... cmt->PAPUB keys already sent...cmt->PAPUB keys already sent...cmt->PAPUB keys already sent...cmt->PAPUB keys already sent...Sending CMT HASH for SOS*UPDAPPSending CMT HASH for SOS*DSP0Sending CMT HASH for SOS*ISASWSending CMT HASH for SOS*CORESending CMT HASH for SOS+ROFSProcessing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_ENO_A_2009wk15v0.100.fpsx...Sending CMT HASH for SOS*ENOWrite result 27: 1701Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_vEM9D_02_euro3.fpsx...Sending CMT HASH for SOS+ROFXWrite result 27: 1701Processing C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_uda_vEM9D_01_euro3.fpsx...Rebooting...Finishing CMT session...Restarting CMT...Pooling phone...Phone not found...Second try...Phone not found...Done!Si in legatura cu backup la RPL nu am facut , nu am facut backup la nimic din telefonNu e nci simul defect, magnetizat am incercat si cu orange,cosmoteInfo LogJAF version 1.98.62Detected PKEY: 90009B6CCard life counter: 99.99%P-key nokia module version 01.02FBUS INTERFACE NOT CONNECTED!!!USB Cable Driver version: 7.1.78.0Changing mode...Done!Searching for phone...Detected P-KEY: 90009B6CP-key nokia module version 01.02Init usb communication...FoundMCU SW version: V 07.1015-07-09RM-243© NokiaHW version: 0602PCI version: RFIC version: 17141714DSP version: 06w41pb_08w28.0.1_rm243APE SW Core version: 07.10APE Variant version: V EURO301-12-06RM-243Retu version: 15Tahvo version: 22APE HW version: 256APE ADSP SW version: 256APE BT version: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.Production serial number: MIG912121Product code: 0553600Module code: Basic production code: 0539292Flash code: Order number: Product specific data: Long production SN: 0ATO: Default SN type: IMEI plain: 356252017316156IMEI spare to net: 3A 65 52 02 71 13 16 05 IMEI SV to net: 33 65 52 02 71 13 16 55 F9 LOCK STATUS:CONFIG KEY: 0000000000000000Provider: Unknown providerKey Code count: 0, FBUS Code count: 0Loading INI list...Detected P-KEY: 90009B6CP-key nokia module version 01.02Init usb communication...Reading product code...Product Code: 0553600Searching for JAF saved location of ini...Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\Searching for default location of ini...Checking path: C:\Program Files\Nokia\phoenix\products\RM-78\Products\RM-243\Searching for JAF saved location of ini...Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\Scanning ini files...Searching for default location of ini...Checking path: C:\Program Files\Nokia\phoenix\products\RM-78\Products\RM-243\Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\FILES SET FOR FLASHING:MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_core.fpsxPPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_ENO_A_2009wk15v0.100.fpsxCNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_vEM9D_02_euro3.fpsxAPE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_07.10_prd_uda_vEM9D_01_euro3.fpsxDone!''Ma chinui sa ai dau de capat la jaf 1.98.64 pkey dongle not detected, ca am o placa de baza tot de 6120c RM 243 si sai fac un back-up la asta dar nu merge J.a.F'' si la J.A.F 1.98.62 nu pot bifa CRT BKP. ]Asa arata la INFO cealalta placa de bazaSearching for phone...Detected P-KEY: 90009699P-key nokia module version 01.02Init usb communication...FoundMCU SW version: V 07.1015-07-09RM-243© NokiaHW version: 0602PCI version: RFIC version: 17141714DSP version: 06w41pb_08w28.0.1_rm243APE SW Core version: 07.10APE Variant version: V EURO301-12-06RM-243Retu version: 15Tahvo version: 22APE HW version: 256APE ADSP SW version: 256APE BT version: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.Production serial number: MMH042692Product code: 0553527Module code: Basic production code: 0539292Flash code: Order number: Product specific data: Long production SN: 0ATO: Default SN type: IMEI plain: 356252019943312IMEI spare to net: 3A 65 52 02 91 49 33 01 IMEI SV to net: 33 65 52 02 91 49 33 51 F9 LOCK STATUS:CONFIG KEY: 2440700000000000Provider: AT&T;U.S.A. (3650)Key Code count: 0, FBUS Code count: 0Block 1:Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Block 2:Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Block 3:Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Block 4:Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Block 5:Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Block 6:Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Block 7:Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN Loading INI list...Detected P-KEY: 90009699P-key nokia module version 01.02Init usb communication...Reading product code...Product Code: 0553527Searching for JAF saved location of ini...Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\Searching for default location of ini...Checking path: C:\Program Files\Nokia\phoenix\products\RM-78\Products\RM-243\Searching for JAF saved location of ini...Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\No ini files found... Edited January 6, 2013 by Onofreian Quote
dixongsm Posted January 5, 2013 Report Posted January 5, 2013 (edited) LOCK STATUS:CONFIG KEY: 0000000000000000Provider: Unknown providerAici este problema! Nu am lucrat niciodat? cu J.A.F. crack, dar m? gândesc c? lucreaz? ca ?i originalul. În cazul asta, verific? dup? IMEI, unde ai instalat J.A.F.-ul dac? ?i-a f?cut vreun backup la ceva.Mâine î?i fac upload la un alt tool mai complex decât J.A.F-ul s? verifici SIMLOCK-ul.Din logul de la J.A.F. rezult? clar c? este bulit simlock-ul...OFF.P.S. Pentru to?i "habarni?tii", cartelele sim NU SE MAGNETIZEAZ?. Dac? "tutele" de la magazine spun c? cartela s-a magnetizat asta nu însemn? c? asta s-a întâmplat. Nu au preg?tirea necesar? s? v? informeze corect, atâta tot!!! Edited January 5, 2013 by dixongsm Quote
dixongsm Posted January 7, 2013 Report Posted January 7, 2013 (edited) Uite AICI un tool cu care po?i face backup ?i info.Oricum, chiar dac? faci backup la certificatele de la placa func?ional? nu te ajuta cu nimic. Pe române?te spus: nu po?i scrie certificatele din placa a doua, în prima.V?d în logul postat de la a 2-a plac? c? aceasta este OK. De ce nu o folose?ti? Problema la prima placa este c? s-a bulit simlock-ul. De reparat se repar? ?i free, dar din p?cate pentru tine, nu se poate pe usb, doar pe interfa?? f-bus si cablu aferent!Nu te mai chinui cu crack-ul acela de la Jaf...?i-a?a este dep??it ca tool, caut? mai bine o versiune de mxkey crack.L.E. Uite AICI o versiune de MxKey crack! Baft?. Edited January 7, 2013 by dixongsm Quote
Onofreian Posted January 7, 2013 Author Report Posted January 7, 2013 (edited) Mersi mult pentru toate sfaturile , iar placa cea functionala nu merge in sensul ca nu afiseaza pe dislpay doar o lumina alba poate sa fie de la soft?R.E Se aprinde se stinge can'd conectez cablul usb se aude conectarea si can'd apas pe butoane se aprind luminile. Edited January 7, 2013 by Onofreian Quote
dixongsm Posted January 7, 2013 Report Posted January 7, 2013 Dac? lcd-ul este în regul?... atunci vinovate sunt cele doua filtre esda din stânga conectorului ptr lcd. Software nu are cum s? fie dac? telefonul porne?te ?i r?spunde la comenzi(se stinge ?i se aprinde lumina cand sunt ap?sate tastele, etc, etc). Quote
