Cisco Certified Network Associate (CCNA)

[bogdi19]

Lesson 01 - Introduction to Cisco Certified Network Associate (CCNA) Certification

Lesson 02 - Different Types of Router Memory

Lesson 03 - How to communicate with a Router using Console, Auxiliary, Telnet, SSH, HTTP and HTTPS connections

Lesson 04 - How to connect and access a router or switch using console connection

Lesson 05 - How to connect to router or switch console if serial port is not available in computer

Lesson 06 - How to use HyperTerminal Terminal Emulator to configure or monitor a Cisco Router or Switch

Lesson 07 - How to use PuTTY Terminal Emulator to configure or monitor a Cisco Router or Switch

Lesson 08 - Cisco's Three-tier Hierarchical Network Model

Lesson 09 - Benefits of Segmenting a network using a Router

Lesson 10 - What are Collision Domain and Broadcast Domain

Lesson 11 - Cisco Router Boot Sequence

Lesson 12 - What is Trivial File Transfer Protocol (TFTP)

Lesson 13 - How to install Solarwinds Trivial File Transfer Protocol (TFTP) Server

Lesson 14 - How to configure Solarwinds Trivial File Transfer Protocol (TFTP) Server to backup IOS and configuration files

Lesson 15 - Cisco Router Configuration Files

Lesson 16 - Naming Convention of Cisco IOS Image Files

Lesson 17 - How to backup IOS and configuration files to Trivial File Transfer Protocol (TFTP) Server

Lesson 18 - How to Upgrade or Install IOS from Trivial File Transfer Protocol (TFTP) Server

Lesson 19 - Cisco IOS Command Line modes

Lesson 20 - How to configure passwords to secure Cisco Router

Lesson 21 - Basic Cisco Router Configuration Commands

Lesson 22 - Cisco Router Show Commands

Lesson 23 - Important Key Combinations of Cisco IOS Command Line Interface (CLI)

Lesson 24 - Router interface naming convention

Lesson 25 - Cisco Router interface configuration commands

Lesson 26 - How to configure Router Serial Interfaces

Lesson 27 - What is Cisco Discovery Protocol (CDP)

Lesson 28 - Important Cisco Discovery Protocol (CDP) IOS commands

Lesson 29 - Types of Routes - Static Routes and Dynamic Routes

Lesson 30 - What is the difference between Routing Protocols and Routed Protocols

Lesson 31 - What is Autonomous System and Autonomous System Number

Lesson 32 - What is Administrative Distance

Lesson 33 - Introduction to Static Routes and Default Routes

Lesson 34 - How to configure Static Routes and Default Routes

Lesson 35 - What is Dynamic Routing and different types of Dynamic Routing

Lesson 36 - What is Routing Metric Value

Lesson 37 - What is Convergence of Routing Tables

Lesson 38 - Introduction to Distance Vector Routing Protocols

Lesson 39 - Introduction to Routing Information Protocol (RIP)

Lesson 40 - How to configure Routing Information Protocol (RIP)

Lesson 41 - Introduction to Interior Gateway Routing Protocol (IGRP)

Lesson 42 - How to configure Interior Gateway Routing Protocol (IGRP)

Lesson 43 - What is Routing Loop and how to avoid Routing Loop

Lesson 44 - Introduction to Link State Routing Protocols

Lesson 45 - Introduction to Open Shortest Path First (OSPF) Protocol

Lesson 46 - How to configure Open Shortest Path First (OSPF)

Lesson 47 - Introduction to Hybrid Routing Protocols

Lesson 48 - Introduction to Enhanced Interior Gateway Routing Protocol (EIGRP)

Lesson 49 - How to configure Enhanced Interior Gateway Routing Protocol (EIGRP)

Lesson 50 - Introduction to Access Control Lists (ACL)

Lesson 51 - Standard Access Control Lists (ACLs)

Lesson 52 - Where should a Standard Access Control List (ACL) be placed

Lesson 53 - Access Control List (ACL) - Wildcard Masks

Lesson 54 - How to create and configure Standard Access Control Lists (ACLs)

Lesson 55 - Extended Access Control Lists (ACLs)

Lesson 56 - Where should an Extended Access Control List (ACL) be placed

Lesson 57 - Extended Access Control List (ACL) - Operators

Lesson 58 - Extended Access Control List (ACL) - TCP and UDP port numbers and names

Lesson 59 - Extended Access Control List (ACL)- established Keyword

Lesson 60 - How to create and configure Extended Access Control Lists (ACLs)

Lesson 61 - How to create and configure Access Control Lists (ACLs) for vty lines (telnet and ssh)

Lesson 62 - Named Access Control Lists (ACLs)

Lesson 63 - How to create and configure Standard Named Access Control Lists (ACLs)

Lesson 64 - How to create and configure Extended Named Access Control List (ACL)

Lesson 65 - How to edit a Named Access Control List (ACL) on router

Lesson 66 - Introduction to Network Switches

Lesson 67 - Difference between Network Switches and Bridges

Lesson 68 - Methods of Switching

Lesson 69 - Difference between Half-duplex and Full-duplex Switching

Lesson 70 - Functions of a Network Switch

Lesson 71 - What is switch management VLAN and how to configure Management VLAN

Lesson 72 - Basic Cisco Switch Configuration Commands

Lesson 73 - What is Broadcast Storm

Lesson 74 - What is Layer 2 Switching loop

Lesson 75 - What is Spanning Tree Protocol (STP)

Lesson 76 - What is Bridge Protocol Data Unit (BPDU) frame

Lesson 77 - Bridge Protocol Data Unit (BPDU) Frame Format

Lesson 78 - What is a Root Bridge (Switch)

Lesson 79 - What is a Root Port

Lesson 80 - What are Port Cost, Port Priority and Path Cost Values

Lesson 81 - How Spanning Tree Protocol (STP) select Root Port

Lesson 82 - What is a Designated Port

Lesson 83 - How Spanning Tree Protocol (STP) select Designated Port

Lesson 84 - Difference between Root Port and Designated Port

Lesson 85 - Spanning Tree Port States

Lesson 86 - Topology Changes in Spanning Tree Protocol (STP)

Lesson 87 - Spanning Tree Protocol (STP) Convergence

Lesson 88 - What is Spanning Tree Protocol (STP) PortFast

Lesson 89 - How to configure and verify Spanning Tree Protocol (STP) PortFast

Lesson 90 - How to enable or disable Spanning Tree Protocol (STP)

Lesson 91 - What is Rapid Spanning Tree Protocol (RSTP)

Lesson 92 - Difference between Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP)

Lesson 93 - Per-VLAN Spanning Tree (PVST) and Per-VLAN Spanning Tree Plus (PVST+)

Lesson 94 - What is Virtual Local Area Network (VLAN)

Lesson 95 - Advantages of VLAN

Lesson 96 - VLAN Membership Types

Lesson 97 - How to create and name static VLAN

Lesson 98 - How to view VLAN information

Lesson 99 - Types of VLAN connection links - Trunk Links and Access Links

Lesson 100 - VLAN Frame Tagging

Lesson 102 - Inter-Switch Link (ISL) VLAN Tagging

Lesson 102 - IEEE 802.1Q VLAN Tagging

Lesson 103 - How to configure VLAN trunk link and native VLAN

Lesson 104 - How to configure and assign a switch access port to a VLAN

Lesson 105 - What is VLAN Trunking Protocol (VTP)

Lesson 106 - What is VLAN Trunking Protocol (VTP) Domain

Lesson 107 - VLAN Trunking Protocol (VTP) Modes

Lesson 108 - VLAN Trunking Protocol (VTP) Advertisement Messages

Lesson 109 - How to configure VLAN Trunking Protocol (VTP)

Lesson 110- How to view VLAN Trunking Protocol (VTP) information

Lesson 111- What is VLAN Trunking Protocol (VTP) Pruning

Free Cisco Certified Network Associate (CCNA) Online Tutorials and Study Guides

[gabyyy]

foarte misto. pe CCNA Security ai ceva? informatia e foarte bine structurata

[bogdi19]

Vezi pe la tutoriale video.