ETH: 06/29/18-11:39:18 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 89.347 Mh/s, Total Shares: 7, Rejected: 0, Time: 00:13
ETH: GPU0 29.799 Mh/s, GPU1 29.802 Mh/s, GPU2 29.746 Mh/s
GPU #0: Ellesmere (Radeon RX Series), 8178 MB available, 32 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX Series), 8178 MB available, 32 compute units (pci bus 3:0:0)
GPU #2: Ellesmere (Radeon RX Series), 8178 MB available, 32 compute units (pci bus 6:0:0)
ETH - Total Speed: 89.465 Mh/s, Total Shares: 7(4+1+2), Rejected: 0(0+0+0), Time: 00:13
ETH: GPU0 29.836 Mh/s, GPU1 29.831 Mh/s, GPU2 29.798 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 89.437 Mh/s
Pool switches: ETH - 0
Current ETH share target: 0x000000006df37f67 (diff: 10000MH), epoch 195(2.52GB)
Current -dcri values: -dcri 6,6,6
GPU0 t=48C fan=83%, GPU1 t=47C fan=83%, GPU2 t=46C fan=83%
GPU #0: Ellesmere (Radeon RX Series), 8178 MB available, 32 compute units (pci bus 1:0:0)
GPU #1: Ellesmere (Radeon RX Series), 8178 MB available, 32 compute units (pci bus 3:0:0)
GPU #2: Ellesmere (Radeon RX Series), 8178 MB available, 32 compute units (pci bus 6:0:0)
ETH - Total Speed: 89.443 Mh/s, Total Shares: 7(4+1+2), Rejected: 0(0+0+0), Time: 00:13
ETH: GPU0 29.810 Mh/s, GPU1 29.820 Mh/s, GPU2 29.812 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 89.440 Mh/s
Pool switches: ETH - 0
Current ETH share target: 0x000000006df37f67 (diff: 10000MH), epoch 195(2.52GB)
Current -dcri values: -dcri 6,6,6
GPU0 t=48C fan=83%, GPU1 t=46C fan=83%, GPU2 t=46C fan=83%
maxgputemp 85
stratumproxy enabled
proxywallet 0x1833a20e5c44a3fdfb9299d4c7cfbbb8aa0ed779
proxypool1 eu1.ethermine.org:4444
proxypool2 eu1.ethermine.org:4444
flags --cl-global-work 8192 --farm-recheck 200
globalfan 85
cor 4f17c7 1250 1250 1250
mem 4f17c7 2050 2050 2050
pwr 4f17c7 6 6 6
vlt 4f17c7 900 900 900
miner 4f17c7 claymore
# ethOS Pool: ethosdistro.com/pool
# QUICK START GUIDE: ethosdistro.com/Q
# HOSTING YOUR OWN REMOTE CONFIG WITH CONFIGMAKER.COM: ethosdistro.com/kb/#configmaker
#
# Read the ethOS knowledge base, a useful guide to getting set up: ethosdistro.com/kb
# Read the ethOS changelog for version information and latest changes: ethosdistro.com/changelog
# Read the ethOS source for verification of source: http://ethosdistro.com/source
#
# There is no email or phone support for ethOS: http://ethosdistro.com/S
# NOTE: Everything with a hashtag/poundsign is a comment, and is ignored by all scripts.
# WARNING: Using apt-get to upgrade, update, and/or install packages is unsupported and will likely break ethOS.
#
# GLOBAL CONFIG SETTINGS THAT APPLY TO ALL RIGS
# SAMPLE FORMAT:
# [type] [value]
# ------------------------------------------------------
# globalminer ethminer
# maxgputemp 85
# stratumproxy enabled
# proxywallet 0x1833a20e5c44a3fdfb92994c7cfbbb8aa00ed779
# proxypool1 us1.ethermine.org:4444
# proxypool2 us2.ethermine.org:4444
# poolpass1 x
# poolpass2 x
# poolemail name@example.com
# flags --cl-global-work 8192 --farm-recheck 200
# globalcore 1000
# globalmem 1250
# globalfan 90
# globalpowertune 20
# autoreboot false
# custompanel publicsecret
# lockscreen enabled
# globaldesktop disabled
# globalname disabled
# ------------------------------------------------------
#
# EXPLANATION OF SETTINGS THAT APPLY TO ALL RIGS
# If using "pool" parameter, write WORKER (a placeholder variable) in place of rig name (i.e. NOT rig1, myrig, home, warehouse2, etc).
#
# globalminer: set global miner (ethminer sgminer-gm claymore claymore-zcash optiminer-zcash sgminer-gm-xmr cgminer-skein ewbf-zcash dstm-zcash ccminer)
# NOTE: ewbf-zcash, dstm-zcash and ccminer (xmr, and others) is for nvidia; for ccminer flags, see http://ethosdistro.com/ccminer.txt )
# maxgputemp: the temperature in C that your GPUs will trigger the miner to turn off
# stratumproxy: enabled/disabled/miner/nicehash (enabled by default; disabled: pool option, nicehash: nicehash support, miner: internal miner proxy)
# proxywallet: the address to which this rig's proxy will mine (only used if stratumproxy is not disabled)
# proxypool1: stratum proxy's first pool (only used if stratumproxy is not disabled)
# proxypool2: stratum proxy's failover pool (only used if stratumproxy is not disabled)
# poolpass1: password for first pool (not used for most pools)
# poolpass2: password for failover pool (not used for most pools)
# poolemail: use only with pools that accepts emails for alerts (nanopool, etc); it might cause some other pools not to work
# flags: set desired flags here, the defaults are known good working
# globalcore: set the global core clock of all GPUs
# globalmem: set the global mem clock of all GPUs
# globalfan: set the fan speed percent (0-100)
# globalpowertune: set the power tune setting of all GPUs (r9 290/x/390/x should use 50; RX should use 4-7 depending on overclock; for nvidia, this is watt limit)
# autoreboot: set to a number (autoreboot 3), allow rigs to autoreboot if they soft crash (max of 3 reboots, run clear-thermals to reset counter)
# custompanel: set ethosdistro.com panel ID, exactly 12 characters, first 6 is your preferred panel ID, last 6 is your private key
# lockscreen: lock the ethOS desktop upon boot
# globaldesktop: login prompt user/pass is ethos/live, set ethOS to headless mode by setting like "globaldesktop disabled" (only works for RX/AMDGPU)
# globalname: set ethOS not to use worker name (useful for pools that do not allow worker names)
# pool: only used with stratumproxy disabled, use this if you have a network proxy or getwork pool (example: http://pool.com:port/WORKER )
#
# PER-RIG STYLE CONFIG SETTINGS THAT APPLY TO INDIVIDUAL RIGS (AND THEIR RESPECTIVE INDIVIDUAL GPUS)
# NOTICE: c94e13 is a SAMPLE rig/[worker]/hostname, change it to the rig/[worker]/hostname of YOUR RIG
# NOTICE: Your rig/[worker]/hostname names are assigned automatically by the OS, do not change them
#
# SAMPLE FORMAT:
# [type] [worker] [gpu0 value] [gpu1 value] [gpu2 value] [gpu3 value] [gpu4 value]
# ------------------------------------------------------
# cor c94e13 950 1000 1050 1025 980
# mem c94e13 1250 1500 1500 1250 1250
# fan c94e13 90 80 85 100 70
# pwr c94e13 10 20 15 15 20
# vlt c94e13 0 1118 0 0 1118
# ------------------------------------------------------
#
# SAMPLE FORMAT:
# [type] [worker] [value]
# ------------------------------------------------------
# miner c94e13 ethminer
# flg c94e13 --cl-local-work 256 --cl-global-work 8192 --farm-recheck 200
# mxt c94e13 70
# reb c94e13 1
# loc c94e13 d3
# sel c94e13 1 2 4
# off c94e13
# wallet c94e13 0x1833a20e5c44a3fdfb92994c7cfbbb8aa00ed779
# rigpool1 c94e13 pool-usa.ethosdistro.com:5001
# rigpool2 c94e13 pool-eu.ethosdistro.com:5001
# rigpoolpass1 c94e13 x
# rigpoolpass2 c94e13 x
# driverless c94e13 enabled
# desktop c94e13 disabled
# name c94e13 disabled
# ------------------------------------------------------
#
# EXPLANATION OF SETTINGS FOR INDIVIDUAL RIGS
#
# cor [worker]: set the core clock of individual GPUs on a single rig
# mem [worker]: set the mem clock of individual GPUs on a single rig
# fan [worker]: set the fan speed of individual GPUs on a single rig
# pwr [worker]: set the powertune of individual GPUs on a single rig
# vlt [worker]: set the voltage of individual GPUs on a single rig, in millivolts (mv) i.e. 1080mv = 1.08v
# miner [worker]: set miner (ethminer, sgminer-gm, claymore, zcash-miner, optiminer-zcash, sgminer-gm-xmr, claymore-zcash, ewbf-zcash) ewbf-zcash is for zcash on nvidia
# flg [worker]: set the flags of a single rig (applies to all GPUs on the rig)
# mxt [worker]: set the maxgputemp of a single rig (applies to all GPUs on the rig)
# reb [worker]: increment this value (example: 4 becomes 5) and the single rig will automatically reboot within 10 minutes
# loc [worker]: set a maximum 8-letter code for rack/location information on a single rig (each rig MUST have a different code, or it will not report to panel)
# sel [worker]: set the GPUs that should mine, default is no sel flag set, all GPUs may mine)
# off [worker]: do not start the miner on boot (no such thing as "on", remove entire line to let miner start)
# wallet [worker]: set the wallet for an individual rig (just the wallet, nothing else)
# rigpool1 [worker]: set the primary pool:port for an individual rig
# rigpool2 [worker]: set the secondary pool:port for an individual rig
# rigpoolpass1 [worker]: set the primary pool password for an individual rig
# rigpoolpass2 [worker]: set the seconday pool password for an individual rig
# driverless [worker]: login prompt user/pass is ethos/live, force the rig to boot without graphics driver, for debugging purposes (this will turn off mining)
# desktop [worker]: login prompt user/pass is ethos/live, set ethOS to headless mode by setting like "desktop [worker] disabled" (only works for RX/AMDGPU)
# name [worker]: set ethOS not to use worker name (useful for pools that do not allow worker names)
#
# PER-BIOS STYLE CONFIG SETTINGS THAT APPLY TO CLASS OF GPU, BASED ON GPU BIOS NAME
# ONLY USEFUL IF USING REMOTE CONFIG
# NOTICE: 113-C6711101-100 is a SAMPLE GPU bios name, change it to the GPU bios name of YOUR GPU
# NOTICE: For a list of GPU bioses, click the "GPU bioses" link in your ethosdistro.com stats panel
#
# SAMPLE FORMAT:
# [type] [bios name] [value]
# ------------------------------------------------------
# cor 113-C6711101-100 1050
# mem 113-C6711101-100 1250
# fan 113-C6711101-100 100
# pwr 113-C6711101-100 50
# vlt 113-C6711101-100 1118
# ------------------------------------------------------
#
# SAMPLE RX 400 SERIES CONFIG
#
# If you have global configs defined for fglrx rigs, you must use individual rig configs for rigs that have RX 400 series GPUS.
#
# KNOWN GOOD WORKING GLOBAL CONFIG FOR AMDGPU
# NOTE: globalpowertune is DPM state range 0-7, set lower for lower power usage, set higher if overclocking.
# ------------------------------------------------------
# globalpowertune 5
# ------------------------------------------------------
#
# SAMPLE PER-RIG CONFIG FOR AMDGPU (for a 6-gpu rig)
# NOTE: pwr is DPM state range 0-7, set lower for lower power usage, set higher if overclocking.
# ------------------------------------------------------
# cor c94e13 1180 1180 1180 1180 1180 1180
# mem c94e13 2150 2150 2150 2150 2150 2150
# pwr c94e13 7 7 7 7 7 7
# ------------------------------------------------------
#
# IN MULTI-RIG MODE, EXAMPLES OF MULTIPLE POOLS/WALLETS/PASSWORDS
# You can define your pool information globally. Then, your per-rig miner will retrieve the parameters.
#
# SAMPLE FORMAT:
# [miner]=[parameter] value
# ------------------------------------------------------
# claymore-zcash=proxypool1 zec-us-west1.nanopool.org:6666
# claymore-zcash=proxypool2 zec-us-east1.nanopool.org:6666
# claymore-zcash=proxywallet 0x1833a20e5c44a3fdfb92994c7cfbbb8aa00ed779
# claymore-zcash=poolpass1 x
# claymore-zcash=poolpass2 x
#
# sgminer-gm=proxypool1 us1.ethermine.org:4444
# sgminer-gm=proxypool2 us2.ethermine.org:4444
# sgminer-gm=proxywallet 0x1833a20e5c44a3fdfb92994c7cfbbb8aa00ed779
# sgminer-gm=poolpass1 x
# sgminer-gm=poolpass2 x
# ---------------------------------------------------------
#
#
# SAMPLE XMR CONFIG (note: the wallet and payment id is long, there are no line breaks)
# -------------------------------------------------------
# globalminer sgminer-gm-xmr
# sgminer-gm-xmr=proxypool1 xmr-usa.dwarfpool.com:8100
# sgminer-gm-xmr=proxypool2 xmr-eu.dwarfpool.com:8050
# sgminer-gm-xmr=proxywallet 0x1833a20e5c44a3fdfb92994c7cfbbb8aa00ed779
# sgminer-gm-xmr=poolpass1 x
# sgminer-gm-xmr=poolpass2 x
# ---------------------------------------------------------
#
#
# SAMPLE DUALMINER CONFIG (for claymore)
# ---------------------------------------------------------
# dualminer enabled
# dualminer-coin sia
# dualminer-pool sia-us-east1.nanopool.org:7777
# dualminer-wallet 0x1833a20e5c44a3fdfb92994c7cfbbb8aa00ed779
# dualminer-poolpass x
# ---------------------------------------------------------
#
#
# REMOTE REBOOT NOTES
#
# You are able to reboot remotely. Start with "1" (no quotes) to reboot a rig.
# Then, if you want to reboot again, increment it to 2, then 3, then 4, etc etc (never skip any numbers).