Search the Community

RoTunneling VPN va oferta servicii VPN rapide, la viteze intre 16Mb/s si 500Mb/s la preturi exceptionale. Plan VPN "Big" BEST PRICE Viteza (maxima): 16 Mb/s Trafic: Nelimitat Dispozitive simultane: 1 Conexiune criptata: DA Mai putine detalii P2P: DA ** Conectivitate Cloud: DA Conectare prin IPv6: DA * SMS cadou (Romania): DA Trafic compresat: DA Uptime: 99% Activare instant: DA Alerte SMS: DA 3 €+TVA (pe luna) 16.1 lei TVA inclus (pe luna)TVA folosit: Romania - 20% CONT NOU "BIG" Plan VPN "Omega" MOST CHOSEN Viteza (maxima): 50 Mb/s Trafic: Nelimitat Dispozitive simultane: 1 Conexiune criptata: DA Mai putine detalii P2P: DA ** Conectivitate Cloud: DA Conectare IPv6: DA * SMS cadou (Romania): DA Trafic compresat: DA Uptime: 99% Activare instant: DA Alerte SMS: DA 5 €+TVA (pe luna) 26.83 lei TVA inclus (pe luna)TVA folosit: Romania - 20% CONT NOU "OMEGA" Plan VPN "Gyga" Viteza (maxima): 250 Mb/s Trafic: Nelimitat Dispozitive simultane: 1 Conexiune criptata: DA Mai putine detalii P2P: DA ** Conectivitate Cloud: DA Conectare IPv6: DA * SMS cadou (Romania): DA Trafic compresat: DA Uptime: 99% Activare instant: DA Alerte SMS: DA 6 €+TVA (pe luna) 32.19 lei TVA inclus (pe luna)TVA folosit: Romania - 20% CONT NOU "GYGA" Plan VPN "Terra" BEST VALUE Viteza (maxima): 500 Mb/s Trafic: Nelimitat Dispozitive simultane: 3 Conexiune criptata: DA Mai putine detalii P2P: DA ** Conectivitate Cloud: DA Conectare IPv6: DA * SMS cadou (Romania): DA Trafic compresat: DA Uptime: 99% Activare instant: DA Alerte SMS: DA 16 €+TVA (pe luna) 85.85 lei TVA inclus (pe luna)TVA folosit: Romania - 20% CONT NOU "TERRA" Detalii: Modalitati de plata: Puteti plati prin: sms, online cu cardul, cash la automatele Zebra Pay /QIWI si transfer bancar. TRIAL: fiecare abonat are 1 zi trial. Facturare: dupa efectuarea platii veti gasi in contul dvs. factura fiscala in format PDF. Utilitate: Scopul serviciului RoTunneling VPN este de a ajuta utilizatorii cenzurati sa acceseze internetul cat si de a asigura securitatea navigarii pe internet. Este strict interzisa folosirea acestuia in activitati ilegale. Redshift IT SRL este procesator de date cu caracter personal NR: 27772, conform legii 677/2001. RoTunneling VPN este un serviciu de VPN, ce foloseste tehnologii noi, inovatoare, atingand astfel performante cu pana la 980% mai mari decat prin protocoalele clasice! Tot traficul este criptat in DHE-RSA-AES128-SHA (pf enabled), si encapsulat in trafic specific https. http, icmp si dns, tehnologia folosita deschide pana la 32 conexiuni simultane pe porturi tcp/udp pentru a accelera banda! Reducere pentru membrii RST: Folositi cuponul (de mai jos) in contul dvs. si beneficiati de 10% reducere: RST Facilitati: -trimiti si primesti sms nelimitat in toate retelele de telefonie mobila din Romania. -tehnologie UT-VPN cu pana la 980% mai rapida. -trafic criptat in DHE-RSA-AES128-SHA (pf enabled). -trafic compresat si encapsulat in https:http, icmp si dns. -32 conexiuni simultane pt accelerarea conexiunii. -pachetele sunt distribuite pe cele 32 conexiuni simultate altfel este aproape imposibil de recompus traficul pentru decriptare, fara algoritmul si criterile negociate intre server si client. -posibilitatea de a seta timpul de viata a unei conexiuni intre 1 secunda si infinit. -viteze pana la 500Mb/s. -alterte cu statusul contului prin sms. -conectare si prin IPV6. -cele mai mici preturi. -bonusuri lunare pentru fiecare recomandare. -disponibil si prin cloud. Metode de plata: sms, card online, cash la automatele Zebra pay si Qiwi, transfer bancar. (prin parteneriat cu MobipPay, astfel plata si informatiile privind plata sunt introduse si administrate in mod exclusiv de catre MobilPay) Tehnologii de conectare suportate pana in prezent: UT-VPN (tehnologia nativa prin aplicatia RoTunneling VPN) Ipsec/L2TP si SSTP OpenVPN Detalii suplimentare: https://www.rotunneling.net/

There are many ways you can go about creating your own Virtual Private Network. Let’s do the easiest one in this tutorial which will be how to use your VPS as your own VPN for your main machines connection. – ro0ted What’s used in this tutorial? Digital Oceans Cloud Debian Server VPS Putty AIO Open Puttygen>Click Generate>move your mouse around the blank space. Then copy the public key to the clipboard, save the public/private key Go to digital ocean control panel click SSH Keys. Copy n paste the public key from Puttygen to Control Panel. Now open Putty. Now once you are in Auth, In RLogin enter Root. Now you can connect to your server without ever entering a key. Minimize this window go to Create Droplet to make your server. Edit yours how you want just make sure you don’t enable Ipv6. Debian is more stable than all of them. Click SSH Key before clicking create droplet. Then go to droplets left side menu. Copy n paste ip in droplets to your putty. Click open. Should work flawlessly. If it does ask for a pass phrase ex: Passphrase for RSA-Key”” that means you put phrase in puttygen. If it says password for root, you did something wrong. If you can set this VPN Server up through this tutorial then just throw your computer away because this is an Automatic Installation for you. There’s really nothing to explain. This script does everything for you. Is it the safest way? Probably not but the more IMPORTANT question should be who do you trust more with your logs? Once signed in. type: sudo apt-get dist-upgrade sudo apt-get upgrade sudo apt-get update wget http://git.io/vpn –no-check-certificate -O openvpn-install.sh; chmod +x openvpn-install.sh; mirror: #!/bin/bash# OpenVPN road warrior installer for Debian-based distros # This script will only work on Debian-based systems. It isn't bulletproof but # it will probably work if you simply want to setup a VPN on your Debian/Ubuntu # VPS. It has been designed to be as unobtrusive and universal as possible. if [[ "$USER" != 'root' ]]; then echo "Sorry, you need to run this as root" exit fi if [[ ! -e /dev/net/tun ]]; then echo "TUN/TAP is not available" exit fi if [[ ! -e /etc/debian_version ]]; then echo "Looks like you aren't running this installer on a Debian-based system" exit fi newclient () { # Generates the client.ovpn cp /usr/share/doc/openvpn/examples/sample-config-files/client.conf ~/$1.ovpn sed -i "/ca ca.crt/d" ~/$1.ovpn sed -i "/cert client.crt/d" ~/$1.ovpn sed -i "/key client.key/d" ~/$1.ovpn echo "<ca>" >> ~/$1.ovpn cat /etc/openvpn/easy-rsa/2.0/keys/ca.crt >> ~/$1.ovpn echo "</ca>" >> ~/$1.ovpn echo "<cert>" >> ~/$1.ovpn cat /etc/openvpn/easy-rsa/2.0/keys/$1.crt >> ~/$1.ovpn echo "</cert>" >> ~/$1.ovpn echo "<key>" >> ~/$1.ovpn cat /etc/openvpn/easy-rsa/2.0/keys/$1.key >> ~/$1.ovpn echo "</key>" >> ~/$1.ovpn } # Try to get our IP from the system and fallback to the Internet. # I do this to make the script compatible with NATed servers (lowendspirit.com) # and to avoid getting an IPv6. IP=$(ifconfig | grep 'inet addr:' | grep -v inet6 | grep -vE '127\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}' | cut -d: -f2 | awk '{ print $1}' | head -1) if [[ "$IP" = "" ]]; then IP=$(wget -qO- ipv4.icanhazip.com) fi if [[ -e /etc/openvpn/server.conf ]]; then while : do clear echo "Looks like OpenVPN is already installed" echo "What do you want to do?" echo "" echo "1) Add a cert for a new user" echo "2) Revoke existing user cert" echo "3) Remove OpenVPN" echo "4) Exit" echo "" read -p "Select an option [1-4]: " option case $option in 1) echo "" echo "Tell me a name for the client cert" echo "Please, use one word only, no special characters" read -p "Client name: " -e -i client CLIENT cd /etc/openvpn/easy-rsa/2.0/ source ./vars # build-key for the client export KEY_CN="$CLIENT" export EASY_RSA="${EASY_RSA:-.}" "$EASY_RSA/pkitool" $CLIENT # Generate the client.ovpn newclient "$CLIENT" echo "" echo "Client $CLIENT added, certs available at ~/$CLIENT.ovpn" exit ;; 2) echo "" echo "Tell me the existing client name" read -p "Client name: " -e -i client CLIENT cd /etc/openvpn/easy-rsa/2.0/ . /etc/openvpn/easy-rsa/2.0/vars . /etc/openvpn/easy-rsa/2.0/revoke-full $CLIENT # If it's the first time revoking a cert, we need to add the crl-verify line if grep -q "crl-verify" "/etc/openvpn/server.conf"; then echo "" echo "Certificate for client $CLIENT revoked" else echo "crl-verify /etc/openvpn/easy-rsa/2.0/keys/crl.pem" >> "/etc/openvpn/server.conf" /etc/init.d/openvpn restart echo "" echo "Certificate for client $CLIENT revoked" fi exit ;; 3) apt-get remove --purge -y openvpn openvpn-blacklist rm -rf /etc/openvpn rm -rf /usr/share/doc/openvpn sed -i '/--dport 53 -j REDIRECT --to-port/d' /etc/rc.local sed -i '/iptables -t nat -A POSTROUTING -s 10.8.0.0/d' /etc/rc.local echo "" echo "OpenVPN removed!" exit ;; 4) exit;; esac done else clear echo 'Welcome to this quick OpenVPN "road warrior" installer' echo "" # OpenVPN setup and first user creation echo "I need to ask you a few questions before starting the setup" echo "You can leave the default options and just press enter if you are ok with them" echo "" echo "First I need to know the IPv4 address of the network interface you want OpenVPN" echo "listening to." read -p "IP address: " -e -i $IP IP echo "" echo "What port do you want for OpenVPN?" read -p "Port: " -e -i 1194 PORT echo "" echo "Do you want OpenVPN to be available at port 53 too?" echo "This can be useful to connect under restrictive networks" read -p "Listen at port 53 [y/n]: " -e -i n ALTPORT echo "" echo "Do you want to enable internal networking for the VPN?" echo "This can allow VPN clients to communicate between them" read -p "Allow internal networking [y/n]: " -e -i n INTERNALNETWORK echo "" echo "What DNS do you want to use with the VPN?" echo " 1) Current system resolvers" echo " 2) OpenDNS" echo " 3) Level 3" echo " 4) NTT" echo " 5) Hurricane Electric" echo " 6) Yandex" read -p "DNS [1-6]: " -e -i 1 DNS echo "" echo "Finally, tell me your name for the client cert" echo "Please, use one word only, no special characters" read -p "Client name: " -e -i client CLIENT echo "" echo "Okay, that was all I needed. We are ready to setup your OpenVPN server now" read -n1 -r -p "Press any key to continue..." apt-get update apt-get install openvpn iptables openssl -y cp -R /usr/share/doc/openvpn/examples/easy-rsa/ /etc/openvpn # easy-rsa isn't available by default for Debian Jessie and newer if [[ ! -d /etc/openvpn/easy-rsa/2.0/ ]]; then wget --no-check-certificate -O ~/easy-rsa.tar.gz https://github.com/OpenVPN/easy-rsa/archive/2.2.2.tar.gz tar xzf ~/easy-rsa.tar.gz -C ~/ mkdir -p /etc/openvpn/easy-rsa/2.0/ cp ~/easy-rsa-2.2.2/easy-rsa/2.0/* /etc/openvpn/easy-rsa/2.0/ rm -rf ~/easy-rsa-2.2.2 rm -rf ~/easy-rsa.tar.gz fi cd /etc/openvpn/easy-rsa/2.0/ # Let's fix one thing first... cp -u -p openssl-1.0.0.cnf openssl.cnf # Fuck you NSA - 1024 bits was the default for Debian Wheezy and older sed -i 's|export KEY_SIZE=1024|export KEY_SIZE=2048|' /etc/openvpn/easy-rsa/2.0/vars # Create the PKI . /etc/openvpn/easy-rsa/2.0/vars . /etc/openvpn/easy-rsa/2.0/clean-all # The following lines are from build-ca. I don't use that script directly # because it's interactive and we don't want that. Yes, this could break # the installation script if build-ca changes in the future. export EASY_RSA="${EASY_RSA:-.}" "$EASY_RSA/pkitool" --initca $* # Same as the last time, we are going to run build-key-server export EASY_RSA="${EASY_RSA:-.}" "$EASY_RSA/pkitool" --server server # Now the client keys. We need to set KEY_CN or the stupid pkitool will cry export KEY_CN="$CLIENT" export EASY_RSA="${EASY_RSA:-.}" "$EASY_RSA/pkitool" $CLIENT # DH params . /etc/openvpn/easy-rsa/2.0/build-dh # Let's configure the server cd /usr/share/doc/openvpn/examples/sample-config-files gunzip -d server.conf.gz cp server.conf /etc/openvpn/ cd /etc/openvpn/easy-rsa/2.0/keys cp ca.crt ca.key dh2048.pem server.crt server.key /etc/openvpn cd /etc/openvpn/ # Set the server configuration sed -i 's|dh dh1024.pem|dh dh2048.pem|' server.conf sed -i 's|;push "redirect-gateway def1 bypass-dhcp"|push "redirect-gateway def1 bypass-dhcp"|' server.conf sed -i "s|port 1194|port $PORT|" server.conf # DNS case $DNS in 1) # Obtain the resolvers from resolv.conf and use them for OpenVPN grep -v '#' /etc/resolv.conf | grep 'nameserver' | grep -E -o '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}' | while read line; do sed -i "/;push \"dhcp-option DNS 208.67.220.220\"/a\push \"dhcp-option DNS $line\"" server.conf done ;; 2) sed -i 's|;push "dhcp-option DNS 208.67.222.222"|push "dhcp-option DNS 208.67.222.222"|' server.conf sed -i 's|;push "dhcp-option DNS 208.67.220.220"|push "dhcp-option DNS 208.67.220.220"|' server.conf ;; 3) sed -i 's|;push "dhcp-option DNS 208.67.222.222"|push "dhcp-option DNS 4.2.2.2"|' server.conf sed -i 's|;push "dhcp-option DNS 208.67.220.220"|push "dhcp-option DNS 4.2.2.4"|' server.conf ;; 4) sed -i 's|;push "dhcp-option DNS 208.67.222.222"|push "dhcp-option DNS 129.250.35.250"|' server.conf sed -i 's|;push "dhcp-option DNS 208.67.220.220"|push "dhcp-option DNS 129.250.35.251"|' server.conf ;; 5) sed -i 's|;push "dhcp-option DNS 208.67.222.222"|push "dhcp-option DNS 74.82.42.42"|' server.conf ;; 6) sed -i 's|;push "dhcp-option DNS 208.67.222.222"|push "dhcp-option DNS 77.88.8.8"|' server.conf sed -i 's|;push "dhcp-option DNS 208.67.220.220"|push "dhcp-option DNS 77.88.8.1"|' server.conf ;; esac # Listen at port 53 too if user wants that if [[ "$ALTPORT" = 'y' ]]; then iptables -t nat -A PREROUTING -p udp -d $IP --dport 53 -j REDIRECT --to-port $PORT sed -i "1 a\iptables -t nat -A PREROUTING -p udp -d $IP --dport 53 -j REDIRECT --to-port $PORT" /etc/rc.local fi # Enable net.ipv4.ip_forward for the system sed -i 's|#net.ipv4.ip_forward=1|net.ipv4.ip_forward=1|' /etc/sysctl.conf # Avoid an unneeded reboot echo 1 > /proc/sys/net/ipv4/ip_forward # Set iptables if [[ "$INTERNALNETWORK" = 'y' ]]; then iptables -t nat -A POSTROUTING -s 10.8.0.0/24 ! -d 10.8.0.0/24 -j SNAT --to $IP sed -i "1 a\iptables -t nat -A POSTROUTING -s 10.8.0.0/24 ! -d 10.8.0.0/24 -j SNAT --to $IP" /etc/rc.local else iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to $IP sed -i "1 a\iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to $IP" /etc/rc.local fi # And finally, restart OpenVPN /etc/init.d/openvpn restart # Try to detect a NATed connection and ask about it to potential LowEndSpirit # users EXTERNALIP=$(wget -qO- ipv4.icanhazip.com) if [[ "$IP" != "$EXTERNALIP" ]]; then echo "" echo "Looks like your server is behind a NAT!" echo "" echo "If your server is NATed (LowEndSpirit), I need to know the external IP" echo "If that's not the case, just ignore this and leave the next field blank" read -p "External IP: " -e USEREXTERNALIP if [[ "$USEREXTERNALIP" != "" ]]; then IP=$USEREXTERNALIP fi fi # IP/port set on the default client.conf so we can add further users # without asking for them sed -i "s|remote my-server-1 1194|remote $IP $PORT|" /usr/share/doc/openvpn/examples/sample-config-files/client.conf # Generate the client.ovpn newclient "$CLIENT" echo "" echo "Finished!" echo "" echo "Your client config is available at ~/$CLIENT.ovpn" echo "If you want to add more clients, you simply need to run this script another time!" fi to begin auto installer type: ./openvpn-install.sh Now if your main machines windows open notepad. go back to putty type: cat ro0ted.ovpn copy all of it to clipboard paste it in notepad>File>Save as>WhateverYouNamedTheClient.ovpn Check if your OpenVPN server is running type: ps ax|grep openvpn You should see something like this: Traffic forwarding has to be enabled for the VPN connection to work. type: nano /etc/sysctl.conf and enable ipv4 forwarding by un-commenting the line “net.ipv4.ip_forward=0? removing the # sign and changing 0 to 1 so it looks like this: net.ipv4.ip_forward=1 ctrl + X Select Y enable masquerading in firewall type: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE Go to Windows Download Openvpn: http://openvpn.net/index.php/open-source/downloads.html After you install it, transfer the ovpn-client1.tar.gz archive to your PC and unpack it to your OpenVPN GUI’s config folder (usually in “C:\Program Files(x86)\OpenVPN\config\”) Start OpenVPN GUI with right click, Run as Administrator (it works only when you run it as administrator). Right click on its System Tray icon and click connect. Source