DeMeDeu Posted August 2, 2017 Report Posted August 2, 2017 (edited) Mi-a aratat cineva, acum ceva timp, un iPhone 4s blocat pe care l-a transformat in iPod. Problema este ca eu nu am cum sa mai iau legatura cu persoana respectiva si nu gasesc nimic concret legat de modul in care a facut asta. Am facut un iphone 4 din piesele care mi-au ramas din reparatiile telefoanelor de acum ceva timp, problema este ca placa de baza pe care am gasit-o pe aici are icloud si este blocat in ecranul de activare. Nu vreau sa il folosesc ca telefon ci pur si simplu ca iPod pentru masina, in esenta ma intereseaza doar aplicatia de muzica si Youtube, deci nu am nevoie sa prinda semnal. Cum fac si eu ce a facut respectivul, cum ii fac bypass sa il pot folosi ca iPod ? Edited August 2, 2017 by DeMeDeu Quote
albastrel Posted August 2, 2017 Report Posted August 2, 2017 (edited) 1. Download and install Java Development Kit 2. Download and extract GW_iCloud_Bypass 3. Put your iPhone 4 into DFU mode 4. Start SSH.jar and wait until you see Success! written with green in the log there, also the iPhone will show the Apple logo with a grey horizontal line on its sreen 5. Open WinSCP and input, host name 127.0.0.1, port 2022, username root, password alpine and press login 6. In WinSCP look for Terminal and open it, then execute command mount.sh, make sure the terminal says "Mounting /dev/disk0s1s1 on /mnt1" and “Mounting /dev/disk0s1s2 on /mnt2" then close Terminal. 7. In WinSCP right explorer pane, navigate to /Mnt1/Applications and delete Setup.app folder 8. Close WinSCP and SSH.jar and hard reset your iPhone 4 by holding home and power buttons until the screen goes black and release the buttons 9. Open TinyUmbrella and wait for your iPhone 4 to show as a recovery device (weird name), click on it and click exit recovery, your iPhone4 should boot normally into the homescreen Edited August 2, 2017 by albastrel 2 Quote
DeMeDeu Posted August 2, 2017 Author Report Posted August 2, 2017 3 hours ago, albastrel said: 1. Download and install Java Development Kit 2. Download and extract GW_iCloud_Bypass 3. Put your iPhone 4 into DFU mode 4. Start SSH.jar and wait until you see Success! written with green in the log there, also the iPhone will show the Apple logo with a grey horizontal line on its sreen 5. Open WinSCP and input, host name 127.0.0.1, port 2022, username root, password alpine and press login 6. In WinSCP look for Terminal and open it, then execute command mount.sh, make sure the terminal says "Mounting /dev/disk0s1s1 on /mnt1" and “Mounting /dev/disk0s1s2 on /mnt2" then close Terminal. 7. In WinSCP right explorer pane, navigate to /Mnt1/Applications and delete Setup.app folder 8. Close WinSCP and SSH.jar and hard reset your iPhone 4 by holding home and power buttons until the screen goes black and release the buttons 9. Open TinyUmbrella and wait for your iPhone 4 to show as a recovery device (weird name), click on it and click exit recovery, your iPhone4 should boot normally into the homescreen Am facut o greseala si am scris iPhone 4, pe cand e 4s, imi pare rau. Presupun ca metoda nu este valabila si pe 4s. Quote
