CristianRoflmao Posted August 27, 2013 Report Share Posted August 27, 2013 Salut,am un prieten care a cumparat un motorola defy care avea pus soft de motorola defy+ 2.3.6 gingerbread.A incercat sa faca un downgrade cu rsd lite,telefonul a fost detectat in bootloader mode,a fost flash-uit cu un sbf de android 2.2 stock iar dupa ce a fost flashuit telefonul nu mai porneste. Dar in momentul cand il conectezi la pc se aprinde ledul alb de sus si nu se intampla nimic,a incercat sa intre in bootloader mode,cacati si nu merge,nu mai porneste pur si simplu.Iar calculatorul nu il mai recunoaste ca sa il reflashuiesc.Am drivere tot instalate tot tot.Telefonul nu are root.Ce e de facut? Bateria e plina nu are treaba ca am incarcato cu un incarcator universal.. Mersi. Quote Link to comment Share on other sites More sharing options...
danger2u Posted August 27, 2013 Report Share Posted August 27, 2013 Option 1. (McGyver method)Get a USB cable, cut the off the B plug (the one that plugs into the device) and strip away the shielding, revealing the 4 individual wires inside: White, Green, Red and Black. Red is +5V DC and Black is ground. strip a few (1-2) mm's off each and gently push them into the + and - slots on the battery. Apply some tape to keep them in place, but don't cover the other connectors. Now plug the battery back in, a tight fit, but possible if you've peeled back the shielding and the white and green wires so that only Black and Red are actually being crammed in there with the batteryIt should look like this: Red goes to the + terminal,Black goes to the - terminalPlug the business end of the newly modded usb cable into your computer.That's it, your Defy should be alive nowMcGyver method found at this thread:[Howto] Fix "Battery Low - Cannot program" - xda-developersI was lazy to write the method by my words...so i just copied from that thread....because he wrote it so well If original author has problems with copyrights, he can PM me and we will sort it out.Option 2. Connect Defy to PC via USB cable. Make sure that your PC is powered on. LED in the top left-hand corner should be white coloured. Leave the Defy overnight to charge. In the morning it should be charged a little bit to charge it via normal methodincearca cu asta cred ca stii ceva engleza Quote Link to comment Share on other sites More sharing options...
CristianRoflmao Posted August 28, 2013 Author Report Share Posted August 28, 2013 Option 1. (McGyver method)Get a USB cable, cut the off the B plug (the one that plugs into the device) and strip away the shielding, revealing the 4 individual wires inside: White, Green, Red and Black. Red is +5V DC and Black is ground. strip a few (1-2) mm's off each and gently push them into the + and - slots on the battery. Apply some tape to keep them in place, but don't cover the other connectors. Now plug the battery back in, a tight fit, but possible if you've peeled back the shielding and the white and green wires so that only Black and Red are actually being crammed in there with the batteryIt should look like this: Red goes to the + terminal,Black goes to the - terminalPlug the business end of the newly modded usb cable into your computer.That's it, your Defy should be alive nowMcGyver method found at this thread:[Howto] Fix "Battery Low - Cannot program" - xda-developersI was lazy to write the method by my words...so i just copied from that thread....because he wrote it so well If original author has problems with copyrights, he can PM me and we will sort it out.Option 2. Connect Defy to PC via USB cable. Make sure that your PC is powered on. LED in the top left-hand corner should be white coloured. Leave the Defy overnight to charge. In the morning it should be charged a little bit to charge it via normal methodincearca cu asta cred ca stii ceva englezaam incarcat bateria cu incarcator universal si tot nu merge e 100% incarcata .. Quote Link to comment Share on other sites More sharing options...
danger2u Posted August 28, 2013 Report Share Posted August 28, 2013 incearca cu prima metodadaca nu merge incearca sa flashezi froyo sbpf pe el. Quote Link to comment Share on other sites More sharing options...
cosminkent Posted August 28, 2013 Report Share Posted August 28, 2013 (edited) Eu am Defy ,chiar dupa el postez acum. Daca esti din Buc poate te pot ajuta. Eu mi-am instalat Wajkiui si este mult mai rapid si stabil decat versiunea stock.L.E - Am uitat sa precizez, cu bootloader-ul lui nu o sa poti face nimic,trebuie sa instalezi altu, daca nu esti din Buc. te pot ajuta maine numai sa ai telefonul la indemana. Edited August 28, 2013 by cosminkent Quote Link to comment Share on other sites More sharing options...
CristianRoflmao Posted August 28, 2013 Author Report Share Posted August 28, 2013 Eu am Defy ,chiar dupa el postez acum. Daca esti din Buc poate te pot ajuta. Eu mi-am instalat Wajkiui si este mult mai rapid si stabil decat versiunea stock.L.E - Am uitat sa precizez, cu bootloader-ul lui nu o sa poti face nimic,trebuie sa instalezi altu, daca nu esti din Buc. te pot ajuta maine numai sa ai telefonul la indemana.Poi nu imi intra in bootloader ca sa ii bag alt sbf,alt software,si la pc nu mi-l detecteaza,si nici in rsd lite..Am telefonul la indemana ca e la mine.. Quote Link to comment Share on other sites More sharing options...
crinexno1 Posted February 12, 2014 Report Share Posted February 12, 2014 am patit-o si eu.. stai linistit..la defy + sunt 2 tipuride rom.. ptr lentila verde sau rosie.nu a luat romul care trebuie. totul se rezolva tot prin rsd lite. da-mi un mail pe : crinexno1@gmail.com si te ajut. Quote Link to comment Share on other sites More sharing options...
