Jump to content
aelius

Vand server IBM x335

Recommended Posts

Posted (edited)

Vand server IBM eServer xSeries 335 model 8676GKG / SN: KKKMV1W

Grade: 1U

Devices


ibm335# pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x00141166 rev=0x33 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'Host Bridge (CNB20-HE)'
class = bridge
subclass = HOST-PCI
hostb1@pci0:0:0:1: class=0x060000 card=0x00000000 chip=0x00141166 rev=0x00 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'Host Bridge (CNB20-HE)'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:0:2: class=0x060000 card=0x00000000 chip=0x00141166 rev=0x00 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'Host Bridge (CNB20-HE)'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:1:0: class=0x030000 card=0x02401014 chip=0x47521002 rev=0x27 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'ATI On-Board VGA for HP Proliant 350 G3 (Rage XL PCI)'
class = display
subclass = VGA
aac0@pci0:0:2:0: class=0x010400 card=0x02869005 chip=0x02859005 rev=0x01 hdr=0x00
vendor = 'Adaptec Inc'
device = 'PCIX133 32/64bit (Adaptec 2410SA SATA RAID)'
class = mass storage
subclass = RAID
hostb3@pci0:0:15:0: class=0x060000 card=0x02011166 chip=0x02011166 rev=0x93 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CSB5 PCI to ISA Bridge'
class = bridge
subclass = HOST-PCI
atapci0@pci0:0:15:1: class=0x01018a card=0x02121166 chip=0x02121166 rev=0x93 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CSB5 PCI EIDE Controller'
class = mass storage
subclass = ATA
ohci0@pci0:0:15:2: class=0x0c0310 card=0x02201166 chip=0x02201166 rev=0x05 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'OpenHCI Compliant USB Controller (OSB4)'
class = serial bus
subclass = USB
isab0@pci0:0:15:3: class=0x060100 card=0x02301166 chip=0x02251166 rev=0x00 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'PCI Bridge (CSB5)'
class = bridge
subclass = PCI-ISA
hostb4@pci0:0:17:0: class=0x060000 card=0x00000000 chip=0x01011166 rev=0x05 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CIOB-X2'
class = bridge
subclass = HOST-PCI
hostb5@pci0:0:17:2: class=0x060000 card=0x00000000 chip=0x01011166 rev=0x05 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CIOB-X2'
class = bridge
subclass = HOST-PCI
bge0@pci0:2:1:0: class=0x020000 card=0x026f1014 chip=0x16a714e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM5703X NetXtreme Gigabit Ethernet'
class = network
subclass = ethernet
bge1@pci0:2:2:0: class=0x020000 card=0x026f1014 chip=0x16a714e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM5703X NetXtreme Gigabit Ethernet'
class = network
subclass = ethernet
ibm335#

CPU


ibm335# grep CPU /var/run/dmesg.boot
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3189.40-MHz 686-class CPU)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0

Memory


ibm335# dmesg | grep memory
real memory = 4294967296 (4096 MB)

Disks


2 x 73 GB / 15.000 rpm (SCSI U320) FUJITSU
....
pass0 at aacp0 bus 0 scbus0 target 0 lun 0
pass0: <FUJITSU MAU3073NC 5C01> Fixed Uninstalled SCSI-3 device
pass0: 211.200MB/s transfers (512bit)
pass1 at aacp0 bus 0 scbus0 target 1 lun 0
pass1: <FUJITSU MAU3073NC 5C01> Fixed Uninstalled SCSI-3 device
pass1: 211.200MB/s transfers (512bit)

Pe retea are doua porturi gigabit, din cate se vede la pciconv (Broadcom NetXtreme)

Pret pentru rst-isti: 150 euro, ca ma lovesc de el pe acasa :))

// edit:

Am pus un cleste ampermetric pe cablul de alimentare:

- Asta e la pornire: https://www.dropbox.com/s/y0fu6yaw7ulu42s/DSCF7513.JPG

- Asta e cu serverul in idle (0,824 Amperi): https://www.dropbox.com/s/nqfpvxpi3dkx27f/DSCF7516.JPG

(Consum) Wati = Volti * Amperi

Serverul suporta 8 GB memorie (maxim) si are 4 sloturi. In el sunt 4 memorii de 1 GB ECC acum.

Edited by aelius
Posted

@Zatarra, mai am un Tyan Transport GT20; sa vad ce am pe el, arata la fel de bine serverul si e net superior fata de asta. (procs xeon nocona, 4 bay-uri SATA), modul raid hw (0,1,5,10). Nu are HDD-urile pe el, in rest e complet (cred ca are 6 sau 8 gb memorie)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...